Update 2-19-2009: For photos of the restored Maillard Conformateur & Formillon For photos showing another restored Maillard Formillon here And photos of a Carrying Case for the Maillard Allie Conformateur and Formillon - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - ——sorry photos aren’t loading, I’m working on repairing this...
As inspired by Steve - Mere Mortals... I’ve had two pieces of 1/8” scrap Curly Maple & Zebra Wood kicking around my shop for years!This seemed like a good way to use them… so I made two…Steve glued his up very quickly & simply… mine, being 1/8” stock was harder to glue-up… but, I made it. My wife liked the Zebra Wood one… I got the Curly Maple… (big grin) Here are four pictures of them… Steve, th...
This is what I like to do with most pencils in my shop! Thanks for watching!
Pencil Tip 3! Another method of pencil sharpening. Thank you Gatorjim for the idea! I hope that you enjoy watching.
I generally use pencils, but last year a co-worker came to me and said “I know you like to build things in your wood shop, but have you ever done any working with metal?” He then showed me a scribe someone had given him to use in HIS shop (he’s an amateur blacksmith). I was interested in trying these and so I put my creative side to pondering…. And within about two weeks I had made about 20 of them. I gave him 10 to share with his blacksmithing buddies and have given ...
I keep seeing these posts pop up more often than not about the scribed line for dovetails, should you leave them on? should you scrap/sand them off? Some say it tells the joint was hand made, Others rightfully so say that the piece itself tells that it was hand made…. Should you make them with a scriber? Or a pencil? A pencil line is easier to remove, but harder to line up to as you are relying on eye sight, Whereas a scribed line with a knife is a no brainer since you just rest your...
I thought it was a great idea to keep a handy shop pencil in the miter slot of my router table or table saw, but it would often threaten to roll away, or just got in the way of one activity or another and I’d end up moving it around. I finally came up with a simple solution that works for me. I took a hunk of 2×3 and drilled 1/2 inch holes in it, nearly all the way through. I then cut the 2×3 to give me a 1-1/2 in x 1-1/2 in block with a hole in it. These I attached...
In this wide world, you just never know how different things will connect us together. Throw in the mix a crazy internet full of stuff, and we more often “bump” into others with similar interests. I have used Shed deer and elk antlers to make a variety of things for several years now, and finding the sheds was my biggest problem. Once I had an antler, I could make something with it. But finding out where a “buck” would drop his prize is another problem entirely. ...
Every woodworker has a pile of lumber just sitting around. This weekend use some of it up to make a decorative pencil holder. Link to Video and Link to my Website
Greg at Oregon Burls posted a Facebook “person to guess closest to the weight of this burl gets a couple of pen blanks” entry. So I assumed a spherical lump of uniform density, did a little ¾πr<sup>3</sup> action, and nailed it. But I don’t have a lathe, nor did I invest in the fancy long drill bit, so this is a jig to rotate the block on the milling machine, some sanding, and the guts from a mechanical pencil. Got a few measurements hilariously wrong, but...
- My Journey As A Creative Designer - Woodworking and Beyond - 1752 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 109 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Toy costruction - 87 parts
- Life as an Amateur Woodworker - 80 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- Sheila Landry (scrollgirl) - 1777 entries
- dbhost - 428 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 250 entries
- Betsy - 228 entries
- stefang - 221 entries
- robscastle - 218 entries
- Dave Rutan - 218 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 194 entries
- A Slice of Wood Workshop - 192 entries