755 days ago
by Brad_Nailor |
12 comments »
Hello everyone! Since I discovered Sketchup several years ago (I have been Skecthing since release 3..pre Google) I have spent a great deal of time watching tutorials and prowling through the forums trying to learn as much about this great software as I can! Since I have been a member here I have seen some great blogs by other members about Sketchup and how to use it, so I thought I would throw my hat in the ring! I see allot of people saying I wish I could use Sketchup better, or I gotta lea...
Read this entry »
567 days ago
by Woodhacker |
13 comments »
When I returned to woodworking several years ago my nephew had been talking about a particular style of “coffee” table he’d seen online somewhere and was describing it to me. Since he’d just announced plans to marry, I told him I’d make him, and his fiancée, the table as a wedding gift.
He showed me some online photos of the table, which I used as the basic, general design plan. The joinery I chose is original but the style was taken from the photos.
This piece is the result:
...
Read this entry »
406 days ago
by Woodhacker |
15 comments »
Some time ago I posted a blog about a dovetail joint I came up with. I call it the radial dovetail. It incorporates handcut dovetails, but rather than using the traditional 1:8 ratio for the dovetail angle for hardwood, each side of each tail varies and is drawn from a perspective point. Then the sides of the box were contoured to blend with the dovetail design.
Here’s a picture of the nearly completed box. It is made of curly maple, Carribean rosewood, and hickory.I like to think of t...
Read this entry »
637 days ago
by woodwkr |
5 comments »
This was an interesting project that I worked on a few years ago. The photo above show the panels in the original room at Henwood Priory, Warwickshire, England. It is the only thing I had to go on. One wall had a fireplace that someone must have blacked out before the auction because it was not part of the sale.( a note: the photos that I use in this blog are rather large so you can see some of the detail. just click on them to see the whole photo and click again to see them actual size )...
Read this entry »
781 days ago
by Mark A. DeCou |
18 comments »
I hesitate to do this, that which I am about to do. I don’t fancy myself as a good carver, or a great picture drawer. Especially with so many lumberjocks that are great carvers here that will see this. On top of that, there are so many great carvers on the internet that will stumble onto this blog because they surf the net.
With that said, after Mark Mazzo asked about the process I go through to do a carved panel like this one, I thought about it for awhile, and decided to show th...
Read this entry »
635 days ago
by woodwkr |
5 comments »
We never thought at the time to chronicle this project with photos, so I will try to muddle through with the few I have. I wish we got a photo of the pile of lumber and panels when they arrived in our trailer, but I can tell you that the site of them caused me to think – - &$#)@ WHAT ARE WE DOING !!!!—- :)
Below are some shots of some parts layed out on the floor in an attempt to make some sense of it all. Click on the photo to get a full size view.
Above is an attempt t...
Read this entry »
748 days ago
by gizmodyne |
9 comments »
ScribingI took Todd’s advice and scribed some hardboard strips.
The first two strips did not fit well, but then I switched from the jigsaw to the bandsaw for cut out. It wentso well that I decided to just go ahead and scribe the real trim, since it was lighter and easier to see the pencil lines.
Here I have the trim board tacked up level.
Here I am setting the compass to the distance that the board needs to lose material. I was shooting for 1/8” below the top of the cabin...
Read this entry »
895 days ago
by David |
11 comments »
Happy Fathers Day to all of my LumberJock buddies, and a belated Happy Mothers Day to all of the Lady Jocks!
I am looking forward to using the LumberJock CyberToolShare feature to explore everyone’s shop and check out what goodies you all got for Fathers Day!
I had the privilege and pleasure of spending the last two days working in my shop. I made a lot of progress on my cherry quilt chests. I am under a time crunch as these need to be delivered at the end of the month, so it was great...
Read this entry »
537 days ago
by PurpLev |
4 comments »
So for a very long time I have been planning to build my daughter a bed.
I have been reading anything I could get about bed construction (I really liked “Anatomy of a Bed” from Fine Woodworking), checking out different beds for design concepts, and construction methods, and have been mentally practicing building it for the longest time.
so I finally came up with the following design. frame is all Maple, joinery is Mortise & Tenon and headboard/footboard panels are planne...
Read this entry »
227 days ago
by gizmodyne |
6 comments »
The Hole in My KitchenFor the past two years we have lived with a hole in the wall of the kitchen where the fridge was. I was going to turn this into a pantry, but we decided to put the fridge back in.
We found a fridge that would accept custom panels. It is 36” wide. and only 24” deep to the doors.We had to cut back one stud in the wall to accommodate the depth and reinforce the floor for the weight, but the hole/nook is ready for the fridge.
DesignI drew up several design...
Read this entry »
1 2 3
27 entries
