Also at: http://blogspud.blogspot.com/2012/07/pallet-board-corner-entertainment.html Hey Everybody! Okay, so after the completion of my last project with pallet wood, I have turned my attention to an issue, my current embarrassment of an entertainment center. To be fair to myself, this was one of my first projects, it had doors, had a coat hanger pole, and was actually a dresser. But since we have moved, it is causing a bit of a clutter and is incredibly imposing. So what bett...
This week I embarked on my latest creation adventure which I made out of pallet wood boards… a patio table with benches! I wanted this to look prestine and clean while maintaining a sort of rustic feel that the pallet wood gives to it. So I went through my stock of pallet boards and pulled the best quality / matching sized boards I could find and used them in the project. The only things I bought for this project were the screws (I normally use the pallet nails for the ultimate recyc...
Hello All, This is not a new tip, but I thought I’d mention it in my blog anyways. As always see my blog at: http://blogspud.blogspot.com/ Ok so working with pallets is not always perfect, the wood is definately not top grade by any means and I will not pretend it is. So occasionally you are going to want to use a wood filler at some point. Now Elmer’s, as well as Varathane and Rustoleum sell wood filler that is pretty good, but the cost can add up significantly and this is ...
Hello Readers, I have been working on several projects this year and I have made a lot of progress in the way of building things from pallet wood and ultimately showing the worth of the wood contained within the crude pallet structures. I have had some great successes such as the highchair: http://palletcraft.blogspot.com/2012/10/pallet-highchair.html As well as the storage bin: http://palletcraft.blogspot.com/2012/10/replacement-storage-shelves.html The Pallet Gate: http://pallet...
Hello All, Take a look at how this is coming along. Should finish this weekend for sure! I designed and cut all of this project from pallet wood. I am very excited with what the outcome has been so far. Check out more projects and things built from pallets at: Pallet Craft!
Also see this on Blogger at: http://blogspud.blogspot.com/2012/07/pulling-boards-from-pallet-without.html Hello all, I have been working with pallets lately and I thought to myself “what if folks want to do this too?” So I decided to share what I found to be the best way to remove a board from the pallet without destroying the pieces. Step 1: Cut the boards off of the top of the pallet.From the edges as close to the brace boards as possible, cut the top Boards (top bec...
Good Morning Readers! Hooray! I am back from the depths of my Pallet Crafting! This weekend I will finally complete a few projects that I want to share with all of you! The Trials! These past few weeks have been a test of endurance and patience. A few failed projects hit the fan, but I gained a ton of experience and knowledge from doing them! I have learned now to take more time for each cut, measuring and remeasuring before the cut line was drawn, then measuring the final cut pie...
Hello Readers, That’s it! I have had enough for one day!... Well that is what I should have said, but if you know me I can’t seem to help myself when it comes to frustration and working on things. I know I should stop, after all, all this frustration is just leading me to rush through critical parts of the project! So I change my attitude towards the project, perhaps my project is frustrated with me because it has seen enough work for one day? Perhaps I am overworking th...
See this post and more at Pallet Craft Hello Readers! You have probably seen lots of things made from pallets on the Internet, from chairs to storage and much more. However there is a key distinction between building projects from pallets and building projects with pallet wood. While both of these methods are recycling the pallet wood and putting them to good use (which I applaud), I want to show that the wood from these pallets can be turned into beautiful pieces instead of usin...
For more on this and other posts, visit: Pallet Craft! Hey all! Today I have something cool to share! So we just got a bunk bed (see my blog for type) second hand for my daughter to have in her room.As we were building it we were saying to ourselves that we wanted to put her stuffed animals on the bottom, but we did not have a second mattress yet and the bottom only had a metal wire support. It was safe to say we wanted to put something on it that would be better than bare metal! My wif...
- My Journey As A Scroll Saw Pattern Designer - 1597 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 96 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1622 entries
- frank - 417 entries
- degoose - 397 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 279 entries
- William - 258 entries
- Betsy - 221 entries
- shipwright - 218 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 198 entries
- Rustic - 188 entries
- BritBoxmaker - 187 entries
- Chris Davis - 183 entries
- Smitty_Cabinetshop - 176 entries