This and more at my blog: Pallet Craft! Hello Readers! Today I am going to share with you the other treatment method used on pallet wood; fumigation using Methyl Bromide. First, I would like to state that using these pallets that have been fumigated using methyl bromide could be extremely dangerous to your health! What is Methyl Bromide? Methyl Bromide is manufactured from naturally occurring bromide salts. The Environmental Protection Agency (EPA) considers this gas to be an ozon...
For more on this topic and other posts visit Pallet Craft! Hello Readers! I wanted to take this time to go further in depth on the use of heat treatment in pallets here in the U.S. and other U.N. member nations. This week I felt that conveying the truths about these processes would be important in clearing up a lot of confusion that I have noticed surrounding this information. Back Story In 2002, the IPPC (International Plant Prevention Convention) convened to set new regulations ...
This is an entry from my blog: Pallet Craft! Hello Readers! I have been writing to this blog for the past few weeks to share my endeavors with pallet woodworking, and over that time I have seen my blog grow exponentially. This is definitely an exciting time for me as I get to share all of these experiences with more and more of you, however, it has been received with some mixed reviews as well. I have had several readers express that they are wary of pallets and their use in woodwork...
More photos available on my blog: Pallet Craft! Hello Readers! This past weekend, a major trend took place, it rained constantly and unrelentlessly. That being said, I was able to utilize my carport this weekend to get things moving on the pallet entertainment center, and the recycled lumber crib mobile. So lets dive right into the action! Pallet Entertainment center! This is probably the most exciting project for me since the pallet wood table that many of my readers saw in my fi...
View more images for this post at: Pallet Craft! Hello Readers! Working with pallets can be fun, it can be gratifying, and it can keep you busy… These are all good things, but there is a dark side to the madness that is; Pallet Craft! Difficulty #1 – Many pallets are decayed or built with cheap wood. It is unfortunate, but many pallets cannot be repaired for use, at least not by me. If this is not bad enough, some pallets are beyond decay, and are not fit for my use and m...
Too see more images on this and other projects, please go to Pallet Craft! Hello all! This was a gift that I made for my fiance the year before our wedding. This breadbox was my first wood working creation that I built with my own two hands, so please excuse the crudeness of the door! It is all purchased wood that I picked up from a hardware store where I went to school. On each side I carved my wife’s (fiance then) favorite flower (Calla Lily) and burned it with a butane lighter ...
For the images and more on this post, please go to: Pallet Craft Hello Readers! So yesterday evening was very productive indeed, although I did not get as far as I wanted, I was able to get a good leg up. Yesterday was also an incredibly tough trial of temptation. When I started out on this project I designed the whole thing to be built out of pallet wood, to show that they could be used in nice project builds. However, the temptation became very intriuging and alluring to build the...
For the images and more on this post please go to my blog at: Pallet Craft! Hello Readers! Today I have a goal set in mind for the entertainment center and mobile builds. I feel this will be important for me to set these goals to ensure I have all the different parts available as I need them. To see the plans for these builds that I put together please visit their respective links. Entertainment Center: (http://blogspud.blogspot.com/2012/07/pallet-board-corner-entertainment.html) ...
For all the images on this entry and others please go to my blog: pallet craft! Hello All, This is part of my series Pallet Craft on my blog. It is pooring out once again, and because I have nowhere else to work on my projects except for my mobile work station (outdoors), I decided to blog about why I do what I do. Woodworking in general came to me as something foriegn that I had never really given a lot of thought of doing (I mean common, I was a tech student), I thought of it as so...
For more on this and other posts, visit: Pallet Craft! Hey all! Today I have something cool to share! So we just got a bunk bed (see my blog for type) second hand for my daughter to have in her room.As we were building it we were saying to ourselves that we wanted to put her stuffed animals on the bottom, but we did not have a second mattress yet and the bottom only had a metal wire support. It was safe to say we wanted to put something on it that would be better than bare metal! My wif...
- My Journey As A Scroll Saw Pattern Designer - 1660 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1685 entries
- frank - 417 entries
- dbhost - 400 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 281 entries
- William - 258 entries
- shipwright - 229 entries
- Betsy - 225 entries
- Stevinmarin - 212 entries
- stefang - 206 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 200 entries
- robscastle - 189 entries
- Rustic - 189 entries
- BritBoxmaker - 188 entries
- Chris Davis - 184 entries