This and more at my blog: Pallet Craft! Hello Readers! Today I am going to share with you the other treatment method used on pallet wood; fumigation using Methyl Bromide. First, I would like to state that using these pallets that have been fumigated using methyl bromide could be extremely dangerous to your health! What is Methyl Bromide? Methyl Bromide is manufactured from naturally occurring bromide salts. The Environmental Protection Agency (EPA) considers this gas to be an ozon...
See this post and more at Pallet Craft Hello Readers! You have probably seen lots of things made from pallets on the Internet, from chairs to storage and much more. However there is a key distinction between building projects from pallets and building projects with pallet wood. While both of these methods are recycling the pallet wood and putting them to good use (which I applaud), I want to show that the wood from these pallets can be turned into beautiful pieces instead of usin...
Hello Readers! Well from the title of this entry, you can probably guess what this is about. Yes, Halloween has not even come yet; Yes, Thanksgiving is more than a month away! But I have learned that planning and starting now will give me the time I need to get the projects done. Why wait until the snow is falling and the bitter cold bites? So what will I be building? Well that is a secret and I will post all about them on December 26th and 27th. I don’t want any gift receivers to...
Hello Readers! Just a quick update: I got plans for the maloof chair, so I will be studying these extensively for my build. My wife has been perusing pinterest and the internet and has stumpled upon a few DIY pallet creations that she loves and wants me to recreate. Well its safe to say I am at no shortage of projects now… Here are a few of the projects she has in mind (more at my blog, I could not fit them all in this post): Now you might have noticed if you read m...
More photos available on my blog: Pallet Craft! Hello Readers! This past weekend, a major trend took place, it rained constantly and unrelentlessly. That being said, I was able to utilize my carport this weekend to get things moving on the pallet entertainment center, and the recycled lumber crib mobile. So lets dive right into the action! Pallet Entertainment center! This is probably the most exciting project for me since the pallet wood table that many of my readers saw in my fi...
This is an entry from my blog: Pallet Craft! Hello Readers! I have been writing to this blog for the past few weeks to share my endeavors with pallet woodworking, and over that time I have seen my blog grow exponentially. This is definitely an exciting time for me as I get to share all of these experiences with more and more of you, however, it has been received with some mixed reviews as well. I have had several readers express that they are wary of pallets and their use in woodwork...
For more on this topic and other posts visit Pallet Craft! Hello Readers! I wanted to take this time to go further in depth on the use of heat treatment in pallets here in the U.S. and other U.N. member nations. This week I felt that conveying the truths about these processes would be important in clearing up a lot of confusion that I have noticed surrounding this information. Back Story In 2002, the IPPC (International Plant Prevention Convention) convened to set new regulations ...
See this and more at my blog: Pallet Craft Hello All, Well today was kind of a bummer, a rain day interupted my plans to wood work, but my wife suggested a project that she would like me to do… a mobile for our daughter’s crib. “BRILLIANT!” I thought to myself as I grabbed a pen and some paper and proceeded to sketch my design shown below. Mobile Design Sketchup This design is pretty simple, the neck of the mobile will extend out over the crib and will be s...
Hello Readers, I have been working on several projects this year and I have made a lot of progress in the way of building things from pallet wood and ultimately showing the worth of the wood contained within the crude pallet structures. I have had some great successes such as the highchair: http://palletcraft.blogspot.com/2012/10/pallet-highchair.html As well as the storage bin: http://palletcraft.blogspot.com/2012/10/replacement-storage-shelves.html The Pallet Gate: http://pallet...
Good Morning All, Ever run into a piece of wood (pallet wood in this case) and wonder; “How the heck did that warp like that?” Working with pallet wood can be a twisted mess of metal, warp and work. These things lead to a lot of distress trying to make them work for a project, leading you to want to pull your hair straight out. Sometimes you just have to llook at it and say in the words of the great Fozzie Bear, ”What the waka?” This is where I stop and cl...
- My Journey As A Creative Designer - Woodworking and Beyond - 1793 parts
- Extremely Average - 324 parts
- Toy costruction - 116 parts
- A journey into the workshop. - 110 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Daily Update - 87 parts
- Woodworking on a Half-Shoestring - 82 parts
- Life as an Amateur Woodworker - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1818 entries
- dbhost - 436 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- mafe - 313 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 241 entries
- Dave Rutan - 231 entries
- Betsy - 228 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- A Slice of Wood Workshop - 210 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 195 entries