Hello All, Take a look at how this is coming along. Should finish this weekend for sure! I designed and cut all of this project from pallet wood. I am very excited with what the outcome has been so far. Check out more projects and things built from pallets at: Pallet Craft!
Hello Readers, I have been working on several projects this year and I have made a lot of progress in the way of building things from pallet wood and ultimately showing the worth of the wood contained within the crude pallet structures. I have had some great successes such as the highchair: http://palletcraft.blogspot.com/2012/10/pallet-highchair.html As well as the storage bin: http://palletcraft.blogspot.com/2012/10/replacement-storage-shelves.html The Pallet Gate: http://pallet...
Good Morning Readers! Hooray! I am back from the depths of my Pallet Crafting! This weekend I will finally complete a few projects that I want to share with all of you! The Trials! These past few weeks have been a test of endurance and patience. A few failed projects hit the fan, but I gained a ton of experience and knowledge from doing them! I have learned now to take more time for each cut, measuring and remeasuring before the cut line was drawn, then measuring the final cut pie...
Hello Readers, That’s it! I have had enough for one day!... Well that is what I should have said, but if you know me I can’t seem to help myself when it comes to frustration and working on things. I know I should stop, after all, all this frustration is just leading me to rush through critical parts of the project! So I change my attitude towards the project, perhaps my project is frustrated with me because it has seen enough work for one day? Perhaps I am overworking th...
See this post and more at Pallet Craft Hello Readers! You have probably seen lots of things made from pallets on the Internet, from chairs to storage and much more. However there is a key distinction between building projects from pallets and building projects with pallet wood. While both of these methods are recycling the pallet wood and putting them to good use (which I applaud), I want to show that the wood from these pallets can be turned into beautiful pieces instead of usin...
For more on this and other posts, visit: Pallet Craft! Hey all! Today I have something cool to share! So we just got a bunk bed (see my blog for type) second hand for my daughter to have in her room.As we were building it we were saying to ourselves that we wanted to put her stuffed animals on the bottom, but we did not have a second mattress yet and the bottom only had a metal wire support. It was safe to say we wanted to put something on it that would be better than bare metal! My wif...
Hello Readers! Well from the title of this entry, you can probably guess what this is about. Yes, Halloween has not even come yet; Yes, Thanksgiving is more than a month away! But I have learned that planning and starting now will give me the time I need to get the projects done. Why wait until the snow is falling and the bitter cold bites? So what will I be building? Well that is a secret and I will post all about them on December 26th and 27th. I don’t want any gift receivers to...
Hello Readers! Just a quick update: I got plans for the maloof chair, so I will be studying these extensively for my build. My wife has been perusing pinterest and the internet and has stumpled upon a few DIY pallet creations that she loves and wants me to recreate. Well its safe to say I am at no shortage of projects now… Here are a few of the projects she has in mind (more at my blog, I could not fit them all in this post): Now you might have noticed if you read m...
Hello Readers! Well my daughter is 6 months old now, and she found the staircase this week…(no worries, we stopped her advancement up them) So I will be building a set of upper and lower staircase gates for her protection against nasty spills. I put together this mockup for the design. As usual this will be made from pallet wood and will be featured on my Pallet Craft blog. But alas! I acquired a block plane! And I am very happy with how it changes the way the wood looks...
This and more at my blog: Pallet Craft! Hello Readers! Today I am going to share with you the other treatment method used on pallet wood; fumigation using Methyl Bromide. First, I would like to state that using these pallets that have been fumigated using methyl bromide could be extremely dangerous to your health! What is Methyl Bromide? Methyl Bromide is manufactured from naturally occurring bromide salts. The Environmental Protection Agency (EPA) considers this gas to be an ozon...
- My Journey As A Creative Designer - Woodworking and Beyond - 1807 parts
- Extremely Average - 324 parts
- Toy costruction - 126 parts
- A journey into the workshop. - 111 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Woodworking on a Half-Shoestring - 90 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1832 entries
- dbhost - 438 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- mafe - 318 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 245 entries
- Dave Rutan - 245 entries
- Betsy - 228 entries
- stefang - 221 entries
- A Slice of Wood Workshop - 213 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- bandit571 - 201 entries