I sold my old lumber storage solution which was… inelegant, to put it lightly. I am purposely storing this set of lumber outside, half because I ran out of room in my indoor storage, but also to have a bit of weathered wood handy, should the need arise. I went simple with this, using some pallet runners, I bored some holes at a slight angle ever so slightly undersized for the conduit pieces I had prepared as shelf supports. I then attached the wood brackets to the wall and hammered in...
https://youtu.be/NL-KcL0LvNo Hello again folks! In my continuing work with reclaimed wood, I made a rustic bird house! I also made a video about it! Enjoy!
https://www.youtube.com/watch?v=k4BlNiZCJQY I needed a way to access higher shelves in my workshop, so I made myself a step stool out of some pallet wood! I hope you enjoy!
https://www.youtube.com/watch?v=19UQdKfjUsY About a month ago, I made a clock out of some pallet wood. I decided it was about time I give the clock face some TLC. I hope you enjoy!
I ended up with a lot of footage, so I am going to split the video up as needed to the time manageable. In this video, I start my new project which is a tilt-out wastebasket cabinet. As usual, I start out with rough lumber, so much of this first video is about preparing the stock. Need to Joint a board that is wider than your jointer? I cover that in this video as well. Stay tuned to see how it all turns out! View on YouTube Instagram: https://www.instagram.com/thomaslightleFaceb...
The time has come to start building my new workbench. I am using wood from some industrial size pallets from my work. The wood is some kind of spruce that came out of Hungary. In this installment I will be preparing the stock that will become the tabletop. I have to do some serious milling to get the stock straight and square before I could get it ready for glue-up. Be sure to participate in the comments section, and I hope you enjoy the video! View on YouTube Instagram: https://www.i...
This is by far my most popular video on Youtube. Funny thing is that I almost didn’t upload it because I didn’t think anyone would be interested. I was wrong. From my channel: Getting the nails out of pallet wood can be the most time-consuming part of salvaging the wood. The pallets I have come apart pretty easily, so I wanted to find a faster, easier way to get the nails out. This is what I came up with… Pallet Wood De-Nailer
Before this project, I had never made anything other than pens on the lathe. I had some scrap pieces from an oak pallet and I decided to laminate them together and experiment. I didn’t know what it would be when I started. I had thought maybe do a little Christmas tree, but then it started looking like a candle holder, so I just went with that. I don’t have a chuck, so I just turned it between a spur center and the tail-stock. I can really see the value of having a chuck now...
Back before Christmas I built this simple beer tote to present some beers, which I had bought my Dad as a gift. As this was a gift I designed it to tightly house the bottles (the handle acts to hold them in place) but this could easily be adapted for day-to-day use. Check out the video below! Subscribe on YouTube: https://www.youtube.com/c/thiswoodwork Visit Website: http://thiswoodwork.com/ Like my Facebook page: https://facebook.com/thiswoodwork Follow me on Twitter: https://...
With the arrival of my new bandaw, I figured it was time to try it out on a project. Thanks to Patricks Workshop on Youtube, I was able to have a fairly easy project to give it a test run. These bandsaw scoops are easy to create and would make nice gifts. Stop over and check out the video HERE and make sure to subscribe for woodworking and blacksmithing videos!
- My Journey As A Creative Designer - Woodworking and Beyond - 1736 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 98 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 78 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1761 entries
- frank - 417 entries
- dbhost - 410 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 303 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 239 entries
- Betsy - 228 entries
- robscastle - 215 entries
- stefang - 214 entries
- Stevinmarin - 212 entries
- Dave Rutan - 209 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 193 entries
- Rustic - 190 entries