This Week I show you how to make a folding out feed table for your table saw. This design was based after an article and plan found in a 2009 issue of Woodworker’s Journal Magazine. Originally the plan was designed for a Cabinet saw with a Biesemeyer Fence System, so I had to make some slight modifications for my Porter Cable Saw. In this 3 part video series I show you a step by step on building this project as well as talk about the modifications I had to make. The Article and plans ca...
This was a challenging commission from a very dear friend. Make a box containing her Red Star.Well the starting point was a mozaic she has hanging at her home, conveniently posted on her Facebook page (I do love the net, everything at you fingertips). I decided to base the design around the large, black bordered, star in the top left. The design was accepted so here I went. The first question I asked myself was – How to do it? The clue was in the mozaic and heres how I did it. P...
After two more surgeries and almost a year, I am getting back to the shop to start woodworking again. Last year I made a “quilted cutting board” and have a few people offer to buy it, but I have no idea what to charge someone for this type of CB. If anybody that sells CB’s could help me I would appreciate it. It is 12×18 x 1-3/8 thk and made from Black Walnut;Sugar Maple;Shedua;Yellowheart;Goncalo Alves;Santos Mahogany;Paduck. It took me two weeks to finish.
The one Project Video I get asked the most to make is how to build a crosscut sled for the Tablesaw. Well there are a lot of videos out there on making a Cross cut sled, so this is my take on it. I hope you can take something from this video and use it in your shop
Recently I posted a video covering common woodworking joinery ( http://www.youtube.com/watch?v=zqXLYe783qw ) with the help of a few friends. In that video I talked to you all about making finger joints on the table saw and showed you a finger joint jig in the process. Well as I promised, here is the complete build process of that Jig. Table Saw Finger Joint Jig Also a little reminder about the 2nd Annual Whirligig Wars. It is almost here!! The event Runs from July 10 –...
Several years ago I saw this ribbon design at segmenting.biz/inlayexample. I started by selecting the body of the design. In this case, padauk, yellow heart, aand hickory for three boards. Then I laminated the “ribbons” Then I cut 2” holes in the boards that make up the body of the design. The problem for a flat boarder(cutting board) was how to create the plugs without a center hole. The first idea was wood turning but this would require a massive square of exotic wood...
Well it has been a while since my last posting on this project. As promised I will show my way of doing marquetry and carvings. Remember that these are my techniques, and yours may vary. There are a ton of ways of doing things and I’m sure there’s a lot of ways easier then mine. For instance many of you may prefer to use a router to route out a majority of the material, then use chisels to cut to the line. I use chisels simply because I do the work on my dining room table. I...
I have gotten a few questions (actually 3) from folk about to how create the Incra Double Dovetails Joints such as the one in this project: I will not be making a box in this blog. But a really good friend saw this box and asked if I could make a 14” x 19” serving tray in the same style. Maureen has been a huge help to my wife and I so I was happy to get a chance to make something for her. Obviously, first place to start is to get an Incra Jig System. I have the old 1...
My version of Ron McIntire’s segmented pen. This just happens to be the way I do it… that best fits how I think through the process. I’m sure there are many other variables in getting the same end. First of all I make a checkerboard blank. The one in this Tutorial is Paduak and Maple. (It works best with contrasting colors). The next step is to cut the sections in equal sizes. I made a ‘zero tolerance’ jig for my miter saw that helps me cut all the sections. In order...
Recently I had a need to build a new table saw base for my saw. Rather than just building a simple replacement base, I opted to build one with lots of storage potential. This new base measures 6 feet long by 2 feet wide, which gave me good reason to move over to the new shop building. I haven’t yet finished the new shop set up ( haven’t even started) but this build is a great start giving me lots of options for storage potential… This build is a 2 part project. So be sure to...
- My Journey As A Creative Designer - Woodworking and Beyond - 1742 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 105 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 79 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1767 entries
- dbhost - 418 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 245 entries
- Betsy - 228 entries
- stefang - 220 entries
- robscastle - 218 entries
- Dave Rutan - 213 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 193 entries
- A Slice of Wood Workshop - 190 entries