LumberJocks

Woodworking blog entries tagged with 'padauk'

  • Advertise with us
View Woodworker_Collins's profile

NEW YOUTUBE CHANNEL!!!!

06-24-2013 04:52 PM by Woodworker_Collins | 5 comments »

I have posted my first 2 videos today, i know i did a workshop tour before but i thought it would be good to put on my actual youtube channel, heres the link: http://www.youtube.com/channel/UCuURBvPUoh_ghXT86FXtIRQ/feedPlease rate, comment and SUBSCRIBE it really means alot and will encourage me to make more videos and they will get even better!

Read this entry »


View MarkTheFiddler's profile

Southwest Cocktail table #4: Another Dry Fit Test

06-22-2013 02:38 AM by MarkTheFiddler | 7 comments »

Howdy, Wouldn’t you know. I cut part of the border from paduak. I was real careful to get it just perfect. It Ain’t. I’ll get if fixed up because I once again have a nervous tendency to err on the side of “Too Big”. You know – shaving 86 of these suckers will once again – suck. Grandpa Len sent me a very kindly note telling me I need to put this creation on a backer. Well – he’s right of course. I was already courting disaster by...

Read this entry »


View MarkTheFiddler's profile

Southwest Cocktail table #2: Simplify ..... sort of....

06-19-2013 04:41 AM by MarkTheFiddler | 4 comments »

My first take was too busy, muddy and lacked contrast. I decided to take what was working and go from there. I definately wanted to keep the Navajo mountain pattern in the Bubinga. Here is where the project is at the moment because – that’s all I have. ;) I’m not going to use Oak. All of the lighter colored wood will be cherry. I’ll be adding a paduak border a bit later. I may be addidng in some peruvian Walnut (Never heard of such a thing until today. Nex...

Read this entry »


View WoodJediNTraining's profile

2 Simple Shop Jigs - Multi Function Tapering / Sandpaper Sheet Quartering

06-08-2013 09:06 PM by WoodJediNTraining | 8 comments »

Hey everyone, Just wanted to share a couple of shop Jigs with you. One is a quick and simple jig for quartering your sheets of sandpaper to use in your palm sanders or sanding blocks. The second jig is a multi function tapering Jig that lets you do 4 sided tapers as well as straight edging rough sawn boards and cutting angles also.. There could be many more uses, there are just the 3 I focus on in the videos. Part 1 Part 2 Part 3

Read this entry »


View Airframer's profile

Workbench Build #25: Forward Progress finally... Top Glue Up done and Legs started..

06-08-2013 06:27 PM by Airframer | 7 comments »

So, it has been a few months since I have done any work on the bench. I think I needed a mental reset and to get through the rest of my wife’s pregnancy distracted by small projects. Now that that is over with and my shop is in a manageable condition again finally I can get back to work on this elephant of a project. Having a newborn in the house has limited my available time in the shop but that seems to have focused my energy when I DO get in there to get something done while ...

Read this entry »


View Airframer's profile

Hand Tool Journey #18: Shop Made Dovetail Layout Compass.. Part 6.. Project Complete!

06-02-2013 09:33 PM by Airframer | 1 comment »

Just wanted to post a completed update to this chapter of the blog. Thanks for following along!

Read this entry »


View WoodJediNTraining's profile

Whirlgig Wars 2013 - Summer Woodworking Fun!!

05-25-2013 11:26 PM by WoodJediNTraining | 1 comment »

Oh yea! Time to kick off the summer with the 2nd Annual Whirligig Wars Woodworking Event. Spend that shop time preparing for battle and build a whirligig for the event. We have some great prizes this year from our Awesome Sponsors Laguna Tools Rockler Woodworking and HardwareWoodworkers Guild of AmericaMicro JigThe United Federation of Woodworkers Brought to you by A Simple Design of Ocala, Inc. & Woodworking for Mere Mortals You don’t want to miss this!! Here is a look ...

Read this entry »


View jusfine's profile

Roubo Inspired Bench #5: Getting closer - finally getting the slabs on top of the bench, & an orange dog or 2

05-25-2013 09:51 PM by jusfine | 9 comments »

The rails have been assembled, legs attached to the cabinet, a little clean up and should be ready to mortise for the slabs. It appears I have some corrupted images on my memory card, so may not be able to post any of the photos of mortising or attaching the slabs through the rails with the SPAX type screws. Slabs have been fastened to the top with one screw at each end, there is a 2” gap between the two sections. I wanted a wide enough space to be able to use a Be...

Read this entry »


View jusfine's profile

Roubo Inspired Bench #4: Benchcrafted Hardware installation and a surprise visit

05-25-2013 09:09 PM by jusfine | 5 comments »

Installation of the wagon vise hardware – very easy to follow directions! Gluing up the paduak for the leg vise. If you are going to use the crisscross system, ensure you have a minimum of 2 1/4” final thickness on your vise as the cavity routed for the hardware is considerable. Plywood top is in place and vise hardware is partially assembled. Couldn’t resist trying the hardware out after the right front leg was drilled for the holdfast clamp...

Read this entry »


View jusfine's profile

Roubo Inspired Bench #3: Dog Strip, Routing, End caps, plugs

05-25-2013 05:44 PM by jusfine | 2 comments »

I did follow the WoodWhisperer’s plans for the dog holes as well as many of the other elements. I reversed the dog hole jig to make one for the dog block which was canted in the opposite direction. The only thing that accomplished was it kept the 3/8” strip on the movable dog block on the same side as the glue-up. Routing the dog holes went smoothly, lots of sawdust and shavings! Gluing the thin strip to the routed piece with a full length caul. Broug...

Read this entry »


« prev 1 ... 7 8 9 10 11 12 13 ... 26 next »
257 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com