Gorilla Glue has challenged LumberJocks to build anything for enjoying the great outdoors using just two materials (wood and any other material of your choice) plus any gorilla glue product. And now you can admire 17 beautiful entries as a result of this challenge. As mentioned in my Challenge announcement, it’s time to announce 16 random winners of cool prize packages by Gorilla Glue: Grand Prize consists of $200 plus 1 of each Gorilla Glue’s products and a Gorilla Glue t-s...
LumberJocks, can you get tough? LumberJocks.com is proudly hosting the Gorilla Glue Challenge. This is a fun and creative event for all woodworkers, but be careful; this may be a sticky challenge! Bond with your wood and the great outdoors while competing in this challenge to win some great Gorilla Glue products. Gorilla Glue is challenging you to build anything for enjoying the great outdoors. You must use two materials, one must be wood and any other material of your choice. You m...
Was FINALLY able to get back to the shop after 12-13 days! Got a bit more done on the table: Trimmed tenons to fit mortises for the top: Dry fit the top: Cut, trimmed and mitered the apron tenons for the base: Here’s the base dry fit: And, the almost completed table!
Why Some "Pine" May Not Be The Right Wood For Some Outdoor Furniture In Some Areas, Some of the Time
I have a great friend that is learning to do woodworking. He has been working hard at it the past 5 years, or so, and building some adult Adirondack Chairs was his first entry into making his own project. I suggested a curved seat, and a curved back for comfort (I had spent about 18 months perfecting my own Adirondack chair design, before I gave up), but he wanted to make them simpler. He found a plan on the internet, and went to work. They started out as gifts, and then he decided to s...
We need a low outdoor table for drinks and food, etc., Something that would tie into the design of the chairs that we already have. My first inclination is to do this table in Western Red cedar (it’s sort of the default everything-outdoor-wood around here), but I keep thinking it would nice to try something else. Again, this is another project that I intend to do this summer, but I do have to side the house, and seal and paint it if I’m lucky (before the rains come again and ...
When my wife and I relocated from Southern Ontario to the West Coast of British Columbia, we (by-and-large) left cold and snowy winters behind us. While it was easy to adjust to a more temperate, albeit wetter, climate, the occasional coastal windstorm (with winds up to 100 km’s/hour or 60 mph) can easily disrupt your hydro / power supply. Even though the power lines in our area are all underground, we are “fed” from areas where the power lines are above ground. Trees / l...
I picked the wood I’m going to use for this project; I’m going to go with Lyptus. I should get down to the lumber store sometime this week… Also, I made some drawings of the top, side, and end. Drawings really are limiting! I’d like to draw this in sketchup, but can barely remember how to draw a rectangle. Actually I can draw a rectangle, but don’t even know how to type in the dimensions I want rather than have to drag the exact distance!!! (Bob Babc...
It took me nine days from start to finish, but I’m finally done with my Adirondack Patio Set. I am really tired of painting too! The chairs are sitting by the pool where they and I will be spending Memorial Day. Hunter and Huckleberry, my English Springer Spaniels, approve. Can anyone tell me if there is a way to format my photos so the right 1/3 of the picture doesn’t get cut off when I link them in my blog? If not, I guess I’ll have to make sure all the im...
After a couple more hours playing with SketchUp…this is where I’m at – and I wouldn’t even be here without the help of Bob Babcock, Damian Penney, Jojo and jsheaney – so thanks guys… Now, it’s not to the tee, and I didn’t use the more advanced functions (for me) of components and groups. I tried. I tried intersecting the tenons (of slats as components) into the table top frame members (individual pieces) to make the mortises, but couldn’t quite get that to happen (so went back to ...
For my son’s fifth birthday, my wife and I decided to check into an outdoor structure for him to play on. I’ve gone back and forth in my mind about this; I didn’t have one growing up, there are nice parks within a 15 minute drive, and he’s an only child at this point. On the other hand, I would love to build this for my son. There are plenty more pros and cons to weigh, but this story is more about the fact that we have…more or less…decided to build. Th...
- My Journey As A Creative Designer - Woodworking and Beyond - 1793 parts
- Extremely Average - 324 parts
- Toy costruction - 116 parts
- A journey into the workshop. - 110 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Daily Update - 87 parts
- Woodworking on a Half-Shoestring - 82 parts
- Life as an Amateur Woodworker - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1818 entries
- dbhost - 436 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- mafe - 313 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 242 entries
- Dave Rutan - 231 entries
- Betsy - 228 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- A Slice of Wood Workshop - 211 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 195 entries