LumberJocks

Woodworking blog entries tagged with 'oscillating spindle sander'

  • Advertise with us
View luv2learn's profile

Buffing option using a spindle sander #1: converting paint roller sleeves to buffers

10-06-2014 06:49 PM by luv2learn | 12 comments »

My latest edition of ShopNotes featured a tip sent in by a reader for buffing parts. Notice that he used his 1 1/2” Φ hole saw as a mount for a section of paint roller sleeve. I tried this and it will work, but me being me, I wondered if this would work better if the section of roller were mounted over the 1 1/2” Φ rubber drums of both my Rigid spindle sander and the small drum of my drill mounted drum. Since these drums expand the sleeves would not slip while buffing. ...

Read this entry »


View Shawn Sealer's profile

TIW Review No. 05 - Oscillating Belt Spindle Sander

07-24-2013 02:12 AM by Shawn Sealer | 5 comments »

Review of the RIDGID Oscillating Edge/ Belt Sander model # EB4424

Read this entry »


View TheBoxStoreCraftsman's profile

The Circle/Radius Sanding Jig

09-12-2012 02:25 AM by TheBoxStoreCraftsman | 8 comments »

Here is an easy to make Sanding/Radius Jig to fit the Rigid oscillating spindle sander Model # EB44241. I’m building this jig out of re-purposed material, a handful of hardware and a drill press turned knob so the cost to make this jig is actually on a couple of dollars (Frugal Craftsman).

Read this entry »


View Matthew agate's profile

Video Projects #5: Spice Rack - Great project - Fun Assembly Music - And MY Mom is in it.

04-24-2012 05:19 PM by Matthew agate | 10 comments »

Feels like a long time since my last video. This one was fun and I get to use my oscillating spindle sander from Grizzly. This is a spice rack I made for my Mom. I do some cutting on the tablesaw and chopsaw but the rest is all coping saw.

Read this entry »


View Matthew agate's profile

Video Projects #4: Spice Rack - Great project - Fun Assembly Music - And MY Mom is in it.

04-24-2012 05:18 PM by Matthew agate | 7 comments »

Feels like a long time since my last video. This one was fun and I get to use my oscillating spindle sander from Grizzly. This is a spice rack I made for my Mom. I do some cutting on the tablesaw and chopsaw but the rest is all coping saw.

Read this entry »


View tedth66's profile

Jet JBOS-5 Oscillating Spindle Sander - Need some help from someone who owns this model.

11-07-2010 02:21 AM by tedth66 | 8 comments »

Does anyone own this spindle sander? If you do I’m wondering if the height listed in the spec (20.8”) is the height with or without the spindle sander installed. I’m trying to design a flip top box for this model sander and my Delta planer but I need this measurement. I currently have this spindle sander ordered but it hasn’t arrived yet. I’d like to know the measurement with the spindle installed. Thank you in advance.

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase