I Am On Fire! It was -15° outside but I was burning up in the shop with an intense desire to organize the lumber rack and get rid of extra stock. This was the last of three projects that I started during the Christmas/New Years week. 1. Sheet the last unfinished wall with plywood.2. Create a sheet goods organizer3. Organize lumber rack and get rid of extra lumber Here is the before picture of the lumber storage area. But take a look at the lumber and sheet goods area now! ...
Yesterday I sold my Ridgid (sniff).Goodbye little buddy. But…... I got my new saw delivered and set up too… : ) manuals galoreand wired with a dedicated circuit today. But along with mo tools/mo problems I started feeling another space crunch. My bench is tall so I can’t outfeed onto it without lowering it or raising the saw. I got stressed about it last night and woke up thinking about my shop layout. So I reread a few articles and decided to try a diagonal la...
Gift Horse PowerThe shop is only a year and a half own and I am constantly cleaning and organizing. Tools have accumulated quicker than I can file them. Kristin’s Grandfather has been giving me tools like crazy.Just two weeks ago(along with yard tools and some nice portable power tools) I received the following: He still had the original documentation. I am not sure what to do with it since I have a large floor press. Love the design. Salvage yardI also have a problem with coll...
Spent at least 4 hours today just cleaning up. Wanted to start planning my dust collection stations , joints etc, but I ended up just counting what parts I have collected so far and cleaning up garbage and saw dust from inside my cabinet saw. I wondered what methods of organization might be more efficient. So I am asking for my fellow lumberJocks to share their sage like wisdom. Thanks Tom.
Just when I thought I was done… I started milling parts and realized that I needed my mobile parts cart. It is actually a 4’ scaffold that I decided worked better as a mobile parts cart. Over the last couple of years it had turned into a permanent storage cart for templates and all around catch-all cart. I stopped work and got a few sticks of framing lumber. I picked the best I could find and cleaned them up in my sanding machine. I drilled 1/2” holes every six inc...
I Think I’m Sick… I can’t seem to stop organizing the shop. I thought that I was done organizing and I started to move on with my project but did not get very far. I got sidetracked with getting my taxes together. This led to the realization that I could dispose of 5 years worth of files and paperwork. This led to me emptying out several file storage containers and almost burning up my shredder. I got a bug and started cleaning up the storage room. This allowed m...
Purging the Lumber Rack Woodworkers naturally have the hoarding instinct and this must be kept in check with strict discipline. The lumber rack has been gathering leftover material and unique pieces of wood for years with little culling to insure the quality of the collection. I cleared three small shelves first and gave a good stack of wood away to a local LumberJock member. He got a Porter Cable dovetail jig for Christmas and this will keep him busy with making boxes. I had the wood b...
Had some shop time today with 42 degrees outside, it was quite a lovely day. my compressor came back to life also – I guess when it goes below 40 the air is too thin for the compressor to be able to raise the pressure in the tank. I also got the radiant heater from Lee Valley. Last time around, by the time I decided to order it- they were out of stock, and just received new stock this week. it works well, not as well as I was hoping for, but decent. To turn it on/off you have to yank...
Like Searching for El Dorado... Open space in the wood shop can be as elusive as El Dorado, the lost city of gold. I am fortunate enough to have a shop large enough that I can have some open space to assemble and stage projects before sending them out. Just as efficiency is critical for my survival, so is open space. Space is necessary to stage incoming materials, assemble, finish, and stage projects for shipping. Space Is A Vacuum Open space in the shop creates a vacuum and it wi...
It Just Won’t Stop! I tore out some double doors at the end of the shop that I never use, I need the wall space to hang my clamps. I figure that since I started doing this little reorganization I might as well finish it. I usually bite things off a couple days at a time and then wish that I had finished or done more. There never seems to be a convenient time to interrupt my work schedule for improving shop conditions, but the payoff is always big when it comes to improved work fl...
- My Journey As A Scroll Saw Pattern Designer - 1585 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 96 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1610 entries
- frank - 417 entries
- degoose - 396 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 278 entries
- William - 258 entries
- Betsy - 221 entries
- shipwright - 213 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 198 entries
- Rustic - 188 entries
- BritBoxmaker - 186 entries
- Chris Davis - 183 entries
- Smitty_Cabinetshop - 176 entries