I started this project a year or two ago when I read about the benefits of a two-stage system. I purchased a Woodstock lid type separator for a five gallon bucket and when I filled it up too fast I cut a hole in the bottom of the five gallon bucket and put it on top of a Rubbermaid bin. Big mistake. However I was using the shop vac all over the house, most of the time by itself so I never really tested the efficiency of the system until the other day. While it was collecting most of the bi...
Since I did the Dust Deputy Review in Episode 27, I have been getting questions and have decided to answer them publicly with a video so everyone may benefit from the answers. In this video I show how I reinforced the 5 gallon bucket lid that I mount the Dust Deputy to. In Episode 28 I gave information to help the woodworkers decide which shop vacuum size might be the best to use with the Dust Deputy. Here are the last 2 videos: Episode 27: Dust Deputy Review Episode 28: Choosi...
In my last video I did a review of the Dust Deputy and showed how effective it is. This prompted several people to ask me about what size shop vacuum is necessary to work with the Dust Deputy. So in this video, I decided to explore that question and share the results with you. Even if you are not planning on using a Dust Deputy, you might find the information helpful in your decision to buy a shop vacuum. If you have not seen how effective it is, check out my previous video where I r...
Building a dust collection system using Oneida’s D.I.Y. cyclone.
I posted this in the review section as well. But I felt the video offers a lot of context on how I use the Dust Deputy as a professional, what tools I use it with, and how I have it set up. This is a lot of good information to consider if you are thinking of getting one. You can see my Dust Deputy review here. Your friend in the shop- Todd A. Clippinger Share the Love-Share the Knowledge
I have declared war on dust in the shop. My shop is in the basement/garage and I have been spending more and more time there. Recently I was planing/jointing around 100’ of rough cut cherry for a project which produced a lot of sawdust from all the power tools used. As a hybrid woodworker, I like to get my wood from the mill and prep it myself, saving money. Once I get the stock flat and square and within 1/8” or less then I switch to hand tools. I purchased a Delta 50-76...
- My Journey As A Scroll Saw Pattern Designer - 1406 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- Just for Fun... - 86 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- Sheila Landry (scrollgirl) - 1430 entries
- frank - 417 entries
- degoose - 394 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- mafe - 230 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 195 entries
- Rustic - 186 entries
- shipwright - 185 entries
- Chris Davis - 183 entries
- stefang - 174 entries
- BritBoxmaker - 168 entries
- PurpLev - 163 entries