All right! Last stretch this week. We will have pro picture next week and I will post them for you guys as well of a video of the mechanism in action. But for now! Lets talk about french polish While finishing the fine sanding I have been pushing forward the pore filling and the polishing of the tray so it could be sent to LA for the leather. Then I started with the pore-filling of the all box. The top first with the pore filling of the outside and inside every other da...
Well, it’s over. my first course in French marquetry, level one, ended yesterday and the consensus is that we all learned a lot. The students learned about French marquetry and I learned about teaching French marquetry. Thank you Len, Kendra, and Phil. I could not have asked for better, more enthusiastic first students.The topics covered were the making of grease paper and assembly of packets, cutting on the chevalets, assembly of motifs, filling with mastic and finally pressing to a...
Hello, I had to stop working on the boxes for 2 weeks as we had classes here at the American School of French Marquetry. Great group But I am back to work on them now. First of all, all the banding is done.They are composed on 2 bone and an ebony string inlay plus an ebony band. The edges of the top are veneered with ebony first Then I cut with a veneer saw the inside marquetry to size and instal the banding The same is done for the sides It is...
We just published a new video on the reversibility of the animal glues and specifically hide glue through a presentation and 2 projects. I hope you enjoy those and it answers some of the questions we receive often regarding the understanding of reversibility. Of course Old Brown Glue has the same property.
I have been carry on working on the boxes with a 2 weeks pause for our february teaching session at the American School of French Marquetry. Great class, here are some pictures More here Anyway. Before the class started I had to finish the inside of the boxes with French Polish, before the room was taken over by the students. There is different way of holding the pieces with nails bent in places Or with small wood blocks I like to have it lay out...
All right! Last time I was done with the marquetry and I had done the mastic on them. I glued them down with Hide Glue and cleaned with called water the paper that hold the pieces from the front with Hot Hide Glue. When all the paper is gone with just cold water, I use one of those green scrubs to clean of the rest of the glue. As there is never a project without at least one f**k up, one of my marquetry panel did slide during veneering. Fortunately, the use of...
We did a new video on this hide glue series on a low-tech technique to veneer columns. Please comment it helps us progress in our videos and do not hesitate to ask question we will do a video to answer you.
Last time I posted on that project I was steam bending my mouldings. The columned were veneered in a previous post. Since this post we had another job to do a video on veneering column with Liquid Hide Glue that we posted on our Old Brown Glue playlist on youtube. It is uploading at the moment so go see it later if you are interested in learning how to veneer columns, we are pretty proud of it. The columns were turned with groves to allow for black rings. T...
So Patrick did veneer the column.He first put the veneer on an kraft paper to hold the fiber ni place, we were not sure this thick veneer will like the bending. The article can be found there http://www.oldbrownglue.com/articles.html What you see here is were the seem was made, on the overlap, using a veneer saw then using the reversibility of the glue with an iron to finish the glueing. It cleans easily enough with water I have been careful enough to mark where the ring inse...
We have been hired to make a dining room table from a 30’s model and slide it on the Biedermeier side. This is not our usual traditional furniture making but it is also a nice change in the usual styles we work on. We started with a simple design to show the overall idea Brick laid apron in pine for a light top Poplar “plaque to glue under the top. it will host a metal plate to bolt the lower part to the top The base is made out of beech, for an heav...
- My Journey As A Creative Designer - Woodworking and Beyond - 1792 parts
- Extremely Average - 324 parts
- Toy costruction - 114 parts
- A journey into the workshop. - 110 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 81 parts
- Woodworking on a Half-Shoestring - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1817 entries
- dbhost - 436 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- mafe - 313 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 241 entries
- Dave Rutan - 231 entries
- Betsy - 228 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- A Slice of Wood Workshop - 210 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 195 entries