LumberJocks

Woodworking blog entries tagged with 'oak'

  • Advertise with us
View YorkshireStewart's profile

Not Just Any Box #1: Preparing the Way

01-16-2008 11:26 PM by YorkshireStewart | 14 comments »

I’d been living with this board of burr / burl or pippy oak in the workshop for five or six years and must have picked it up and put it back down at least a hundred times (approx!). I have done quite a few boxes in the past with lids something like this: but I always intended that this piece would be used in a different way, and for something a little bit special. Though I’ve made many boxes, I have never thought of doing one for me, so this challenge presents an opportunity. ...

Read this entry »


View kaerlighedsbamsen's profile

Shop Stool #2 (and curve soled plane)

06-08-2014 11:42 AM by kaerlighedsbamsen | 6 comments »

This is a blog on creating this project. After making my Shop stool I have gotten a lot of interest and questions like “can you make me one as well?” and “is it possible to make it from a light wood?” Inspired from several people here that talk about making money on their woodwork I thought it would be usefull to make another stool experimenting with methods to potentially make it more production friendly. Other than that i set up 3 goals:- It should be made from...

Read this entry »


View Jamie's profile

Router Table #2: Pictures and current progress

04-04-2009 07:27 AM by Jamie | 7 comments »

Well this one is for Karson. Here are some pics of the new router table currently in construction. This picture is just a view from the front. The top consists of 2 pieces of 3/4” MDF glued together sandwiched between a top and bottom layer of black formica. I have not added the solid oak molding around the table top yet, but it’s ready to go. Probably will happen tomorrow, along with the face frame for the cabinet carcass. The top will be a bit over 25” X 36” ...

Read this entry »


View WoodJediNTraining's profile

Woodworking 101 - Common Woodworking Joinery

05-19-2013 06:34 PM by WoodJediNTraining | 5 comments »

I ask a couple of my woodworking friends to help me talk to you about some common woodworking joinery. Woodworking joinery is the method of joining two pieces of wood together to create a more complex item. Woodworking Joinery is the one thing we as woodworkers need to know and this video talks about 4 common woodworking joints that you are most likely to use in your projects. In this video you will learn about the following joints Half Lap Joints – Presented by Jay Bates Jays...

Read this entry »


View WoodJediNTraining's profile

2 Simple Shop Jigs - Multi Function Tapering / Sandpaper Sheet Quartering

06-08-2013 09:06 PM by WoodJediNTraining | 8 comments »

Hey everyone, Just wanted to share a couple of shop Jigs with you. One is a quick and simple jig for quartering your sheets of sandpaper to use in your palm sanders or sanding blocks. The second jig is a multi function tapering Jig that lets you do 4 sided tapers as well as straight edging rough sawn boards and cutting angles also.. There could be many more uses, there are just the 3 I focus on in the videos. Part 1 Part 2 Part 3

Read this entry »


View pintodeluxe's profile

Arts and Crafts 6 Drawer Dresser #11: Waxing Dressers and adding Drawer Pulls

02-04-2013 05:30 PM by pintodeluxe | 8 comments »

I waxed the dressers with Howards Walnut wax and #0000 steel wool. I tested the difference between sanding with a 1500 grit sanding sponge, and waxing with steel wool – and I prefered the latter. I waxed with the grain, and let the wax dry. Then I buffed it off with a clean lint-free rag. ----- For drawer pull layout I used Scott Collins no-math layout method. My drawer pulls have 2 bolts, 3” on center. -----I made a full-height jig to drill the holes for the machine bo...

Read this entry »


View Tom8021's profile

foot powered Scroll saw #1: foot powered Scroll saw #1:

07-16-2009 12:32 AM by Tom8021 | 6 comments »

First off I wanted to do some marquertry but shelling out $400 plus for a slow speed scroll saw was too steep. I tried to find a used one locally, but after a couple of months it wasn’t happening. Then I was going through some old issues of “Woodwork” magazine and found an article on building your own foot powered scroll saw. If you can find it, they are no longer around, it was the October 2006 edition. Anyway the guy who made it was Brian Condran (briancondran@aol.com) and...

Read this entry »


View MT_Stringer's profile (online now)

A New Work Bench, Mikey Style

07-04-2012 02:59 AM by MT_Stringer | 6 comments »

Several years ago, I built a simple work table as a table saw outfeed table. It quickly became my do it all table. It is made out of 2×4’s and two pieces of 1/2 inch cd plywood which I had stored out in my shed. Fast forward to the present time. Lately I have gotten a renewed interest in woodworking. I have been doing some type of carpentry since the 70’s when I was helping my dad build pole barns. After my dad passed away, I was given his Craftsman table saw (circa 197...

Read this entry »


View DocK16's profile

Entertainment Center #1: Base Cabinet

12-21-2008 07:58 AM by DocK16 | 9 comments »

With flat screen TV prices dropping like gas and the holidays fast approaching the guys at Woodsmith Magazine were right on target with this months issue featuring an Entertainment/Media Center. I have been looking for unique set of plans for for an Entertainment Center for some time and this months issue arrived the day after the wifey and I agreed a new flat screen would be our Christmas present to each other. If you’re not familiar with Woodsmith check out their website which has...

Read this entry »


View AttainableApex's profile

Super Duper Sled #1: The Sketchup Plans

09-04-2010 08:25 AM by AttainableApex | 11 comments »

Well here is my latest sled design. This sled is a combination of many sleds that i have seen in the past. One sled that really influenced it, is the super sled by john nixon at eagle lake woodworking. I like the t track on the sled part (the sheet part) but i am going to use real t track. I also liked the t track on top of the fence, which i incorporated, but it stops there. This sled should be able to do just about everything. You can cut 45’s ( blade tilting at 45 deg ) and every o...

Read this entry »


« prev 1 2 3 4 5 6 7 ... 122 next »
1211 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase