The project is pretty much done for my part at least. The owner is finishing it himself in order to color match it to his chair. Great project, I always enjoy traditional work. http://birchhillwoodcrafts.com/ottoman-project-part-ii/
I’ve been remaking all of my sister’s raised panel Oak doors for her kitchen cabinets. There are about 25 of them and I’ve got them 2/3 completed over the past few months working on and off. Today I was working on three of them; long ones. Rails and stiles came out fine and I had to glue up two boards to make the center raised panels. While I was routing the edge of the raised panels two of them chipped out enough so that I can’t use them. This has happened once befor...
I decided it would probably be boring to show each step from the previous ‘milling everything flat and square’ post, to the final board, so here’s the final board, all finished: It is 6-3/4”x8-5/8” and a little over 1.75” thick. Or, you know, about the size of the US hardcover edition of “Harry Potter and the Half-Blood Prince,” though the book is a little less than an inch taller in the longest dimension. Note the butcher’s block c...
I’ve renamed my 5 preexisting project series from “project: whatever” to “00n: whatever” where n is the number of the set of posts in order. E.g. instead of “project: a rolling base for my planer,” that was the second project series I made, so now it’s “002: a rolling base for my planer.” The projects were starting to scatter in my series list, and I’d have a few series listed at the top in the drop-down for new posts, then an ...
I have moved.. and moved a considerable amount of WOOD! I have updated my lumber rack projects with new photos of the current racks. My new shop is the entire basement, and to say its bigger than my last basement shop is an understatement. I have four times the space! and at least 88” of height between my floor mats and floor joists! I have repacked the racks and have collected EVEN MORE WOOD! You see my new house was built in 1918, and the basement had a few excellent resource...
Cora’s, a local Mexican restaurant went out of business recently. On my way back from the bearing shop with the new bits for my planer this past week I noticed a crew tearing the insides out. I stopped in and asked if I could look through their scrap pile for free wood, and as happens pretty much always here in west LA, they looked at me, shrugged their shoulders, and said “sure.” There’s wasn’t much, and nothing great, but the wood looked old, and I t...
Another cross cut sled, big woopee. While not my intention, this cross-cut sled is too big, too heavy, but is square to a gnat’s behind and can handle 20” wide board. Rather than tell you how great it is, I’m going to tell you the problems I had and what I would do differently. But first, thanks to Alaska Jim for PMing me to get off my duff and finish the durn thing. This behemoth being exactly the dimensions of my Grizzly cabinet saw top – 48” wide by ...
My Zone of Wood Art ….art is the interpretation of what is before you, and therefore needs no-out-side influence to make it more then it is in this moment. The problem that many have with art is that it is all-ways regulated to some other plane of our existence, out-side the time-work of where we are now. Because the many see art as so ‘other’, these many lost souls to the world of art, will in-deed all-ways be seeking for art as if it is some-thing that is found in the so ...
A couple days ago i posted my finished cabinet for my table saw and noted the problems with the overall height,and in true lumberjock fashion you guys commented with several great ideas, i just wanted to thank all of you,.. I decided to go with taking the cabinet top off and dropping the saw down into where the dust collection drawer was, was as easy as i thought but i got it done yesterday, ive posted some pics of it during the work, didnt take a final pic but i will and will post them tonig...
I’ve been busy trying to gather up some oak barn wood that was given to me by a local farmer. More on the back story of how I came across it is in this post. I was able to get a couple of pictures before unloading the truck. I’ve posted them here. One of my hopes for the wood is to be able to build a Morris Chair sometime in the future.
- My Journey As A Scroll Saw Pattern Designer - 1199 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 87 parts
- Daily Update - 87 parts
- Just for Fun... - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- Workshop Development - 67 parts
- As The Lathe Turns - 67 parts
- Sheila Landry (scrollgirl) - 1221 entries
- frank - 417 entries
- degoose - 388 entries
- dbhost - 333 entries
- Ecocandle - 325 entries
- MsDebbieP - 301 entries
- Martin Sojka - 297 entries
- Karson - 294 entries
- William - 249 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- mafe - 208 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 187 entries
- Chris Davis - 183 entries
- Rustic - 183 entries
- PurpLev - 162 entries
- shipwright - 160 entries
- BritBoxmaker - 159 entries
- stefang - 145 entries