LumberJocks

Woodworking blog entries tagged with 'oak dowels'

  • Advertise with us
View ruddhess's profile

Southern Yellow Pine Work Surface (workbench) #21: Finishing Up Saw Bench/Saw Horse No. 2

03-23-2015 02:39 AM by ruddhess | 0 comments »

Making up a bunch of oak dowel pegs. I use my old Delta belt/disc sander to clean-up the splinters and chamfer the ends of the dowels. Those oak splinters are a big pain! Oak dowels come in all colors! I keep the sets together and use them on the same joints as much as possible. Second upright on Saw Bench/Saw Horse No. 2 was out of square by 1/4” (diagonal measurements) – after removing the 48” pipe clamps, this is the resulting diagonal measurements: I c...

Read this entry »


View ruddhess's profile

Southern Yellow Pine Work Surface (workbench) #16: Oak Dowels in Screw Holes

03-14-2015 01:14 AM by ruddhess | 3 comments »

From my “bunk bed” screws holding the rails on while the glue dries overnight, to 5/16” oak dowels glued in enlarged holes. Here are four more pins for the next rail. Gluing up the top rail now using new HF 1/2” pipe clamps. At first I didn’t think they were going to work. The back clamp wanted to slide badly. But after I took some Coleman stove fuel to the pipes to remove much of that gummy, waxy finish they worked brilliantly. They are a little bit heavy,...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com