Here are pictures of the bed crown and painting of the nursery I did.
I finally completed the Crib, have it assembled and it is in use. I got a couple questions about the mounting hard ware. The side pannels are removeable. They are supported by Mortise and tennon joints and a screw from the side pannel will lock into a threaded insert along the corner posts. I wanted to conceal as much hardware as I could, and the open part on the side pannels will be capped. The matress frame attaches directly to the corner posts to threaded inserts at four different...
I started this project when we found out we were expecting our first kid. After shopping and not finding anything I liked for the money so I set out to design my own. I wanted a crib that could be broke down and stored when not in use. I bought roughsawn red oak from a local mill an hour from my house. There were a couple things I tried in this project I have never tried before design wise. After trying them, some of those expiriments will not happen again. I tried to make it all part ...
I started this project when we found out we were expecting our first kid. After shopping and not finding anything I liked for the money so I set out to design my own. I wanted a light design and could be broke down and stored when not in use. I also didn’t find many other ideas out there so I hope this may inspire some more ideas. The idea is while he will still be nursing several times a night he can sleep safely next to the bed but not in it. I Used Red Oak and Walnut scrap...
A couple years ago a young lady I work with was shot during a carjacking attempt and left paralyzed from the waist down. At the time she was pregnant with her first child and asked me to develop nursery furniture that would allow her to care for her baby from her wheelchair. This experience led to Village Lane Furniture which has become my pet project. Because of this young lady, I became aware of a furniture audience that is frequently overlooked; wheelchair parents and people with disa...
- My Journey As A Creative Designer - Woodworking and Beyond - 1792 parts
- Extremely Average - 324 parts
- Toy costruction - 114 parts
- A journey into the workshop. - 110 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 81 parts
- Woodworking on a Half-Shoestring - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1817 entries
- dbhost - 436 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- mafe - 313 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 241 entries
- Dave Rutan - 231 entries
- Betsy - 228 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- A Slice of Wood Workshop - 210 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 195 entries