Well, about 330 days ago I wrote something about being finished this piece in another 4 weeks. That didn’t happen, but in my defence I did get other pieces done in that time, I just kept getting pulled away from this jewelry cabinet. The work left on this piece was not big, but very finicky and detailed, which is likely why I kept finding it hard to get traction. I made the three drawers for the bottom section before moving onto the more intricate boxes that sit on the cabinet. ...
I figured I would put this out there in case anyone was interested to know what I do to make these wooden pendants. Its not complicated. Anyone can do it with their scraps. I personally like to use burl wood but if you have less figured wood you can pair it up with contrasting colors and shapes for a nice effect. ANYWAY, Picture time.I skipped the wood selection process in the photos. I was making this one for a friend and she picked the piece, marked the spot she wanted and then I took over...
Hi all, just a quick shout out to see what you think of these sketches…looking for some feedback before I start making sawdust.The first 3 pictures are of the same design from different angles, the 4th, 5th and 6th pictures are the same general design but with slight modifications.Which designs do you like or not like?Any design suggestions? Thanks everyone, I appreciate the input. This is for my wife’s birthday, so to any of you that know her, no talking about this. ;). ...
It’s been a busy month in the shop.I finally refined my design to the point where I was happy with it. I’ve added a very gentle curve to the outside of the top piece as well as the two side pieces. For the bottom, I shortened the feet to 3/4” and shortened the lower drawer section 2 1/2” tall I’ve used sliding dovetails for all of the joinery for the main section. They will provide me peace of mind if the piece is hung on the wall. First time with slid...
Well…that took a lot longer than I expected. You’d think by now I’d remember that milling the lumber and cutting the joinery is only about the first 25% of the job. The bulk of the effort follows as you make the final adjustments, the final shaping, fine tune the details and then actually sand all the parts, glue up and sand again (and then repair the 6 dings/dents that somehow found their way onto my finished work, thank god for wet rags and irons). And I still have to p...
- My Journey As A Scroll Saw Pattern Designer - 1634 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1659 entries
- frank - 417 entries
- degoose - 397 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 279 entries
- William - 258 entries
- shipwright - 228 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 198 entries
- robscastle - 188 entries
- BritBoxmaker - 188 entries
- Rustic - 188 entries
- Chris Davis - 184 entries