LumberJocks

Woodworking blog entries tagged with 'neck'

  • Advertise with us
View FreddyS's profile

3 Strings CBG (cigar box guitar) #4: Fingerboard and box work

11-05-2012 08:03 PM by FreddyS | 8 comments »

Hi again, this weekend was slow because all the fingerboard work, let’s see: Slots for the fret line position inlays ready, made by hand with a hacksaw going really slow to avoid any mistakes. It may be a couple a little bit bad, but noting too obvious :) All the maple inlays ready to be glued and trimmed Inlays closeup Fitting each inlay Inlays done! And now side dots, made with flux core solder, drill each hole, fill it with a small length of solder, melt it with a s...

Read this entry »


View FreddyS's profile

3 Strings CBG (cigar box guitar) #2: More neck work

10-15-2012 11:40 PM by FreddyS | 2 comments »

Hi again, this time I’ll show you the extra work I did with the neck: You can see in the pic the small cigar box I got for the cbg, a Romeo y Julieta brand, cedar plywood, it is almost too small for the scale I choose (25”) but I will use it anyway, time will tell if I need to replace it. Here I did another “first timer”, a pattern jig to cut a nice shape into the headstock, used double sided tape to attach the pattern to the headstock and routed away… and...

Read this entry »


View FreddyS's profile

3 Strings CBG (cigar box guitar) #1: The beginning

10-15-2012 10:28 PM by FreddyS | 3 comments »

Hi everyone, finally I come back with a blog for a little project I been doing in my free time for the last 2 weeks. As it was bound to happen I think, having been a professional musician for nearly 20 years and now interested in woodworking as a hobby among some other things, finally bit the bullet and started building a CBG (cigar box guitar), and this is the short story, short because there really is not too much to tell as the build can be as simple or complicated as you want it to be....

Read this entry »


View YorkshireStewart's profile

Acoustic Guitar #4: The neck

10-01-2012 08:57 PM by YorkshireStewart | 7 comments »

A nice piece of mahogany I’ve been saving for a rainy day.. To Part Five

Read this entry »


View Donna Menke's profile

DragonFly Harp #11: Almost Finished!

05-12-2011 08:05 PM by Donna Menke | 7 comments »

Lots of vegetable gardening done in the past couple of months, and it could not wait, so the harp building project had to wait a while. Finally last week I got back into it after 6 weeks of seldom working on it. Now it is almost done- but let me go back to where I left off in March.I had these beautiful abalone mother-of-pearl wings provided to me by a fine Lumberjock. She also did a great blog about how to do inlays, and that was very helpful to me. I didn’t follow instructions exactly...

Read this entry »


View Donna Menke's profile

DragonFly Harp #1: Planning, planning, planning

12-29-2010 09:44 PM by Donna Menke | 5 comments »

Hi, I’m Donna Menke and I enjoy making things out of wood. You can see more of my projects and links to other woodworking and carving blogs on my web site: www.woodworks-by-donna.comI have some nice cherry wood on hand- so I’m going to make another harp similar to the last one, but with a few variations. Stocks above, and view of grain below.This is the harp I made from plans from MusicMakers back in 2007, out of walnut boards. http://harpmaking.blogspot.com/Here is the rough stoc...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase