I’ve had several requests for pickin’ stick plans. I’ve now posted the plans that I put together a couple of years ago. If you build one, please make sure to post a picture so everyone can see it. Enjoy! http://www.soundsofdovecreek.com/Building%20a%20Pickin%20Stick.pdf
Another easy project to consider making as a gift. Plus, you get to hear Nirvana on the thumb piano! Well, sort of.
We had the privilege to see Stevie Wonder discover the Z-Stik. We have interest from all over the world!Stevie said that he was going to use the z-stik on his next recording. The NAMM stands for- National Association for Music Merchants.
How about this for a musical instrument. http://www.youtube.com/embed/XlyCLbt3Thk?rel=0
Doesn’t seem like 6 days have passed, but the calendar does not lie. I have a lot to catch up with.First order of the day was to edge join the pieces I would need to have wider- like for parts of the stand legs and the base of the harp.These Bessey clamps are the best.Then I needed to cut the angled sides. This was the most dreaded job, and the first rip (with the grain) on the table saw (my second least-favorite power tool). Took most of a morning to assemble the tool and then to figur...
Take a long look at your sculpture Stewart; it’s the last you will see of it! Spread the Titebond. Not too much; we don’t want a mess inside there. In the Shaker tradition, even though we can’t see it, The Almighty can. The plywood caul is flexible enough to follow the curvature of the back or front.
Hi, I’m Donna Menke and I enjoy making things out of wood. You can see more of my projects and links to other woodworking and carving blogs on my web site: www.woodworks-by-donna.comI have some nice cherry wood on hand- so I’m going to make another harp similar to the last one, but with a few variations. Stocks above, and view of grain below.This is the harp I made from plans from MusicMakers back in 2007, out of walnut boards. http://harpmaking.blogspot.com/Here is the rough stoc...
Days and days of mostly just staring at the dumb thing wondering why- oh why- things did not meet the way they should. Take a little off here- then a little off there- shoot!- think I took some off the wrong side. This was not the way to go.My micro-plane was going to be my salvation, but it may have created more problems than it fixed.Talk about creative clamping! Trying to get all the angles right and everything where it is supposed to be so that the screws in the base will end up in the ri...
View on YouTube This is an older project, but I finally edited the video. [Spektebla ankaŭ en Esperanto] Slit Drum A slit drum is a musical instrument in the percussion family. It is usually made from bamboo or wood in the form of a box with one or more slits in the top. The majority of slit drums have only one slit, but some have two or three slits in the form of the letter “H”. If the tongues have different lengths or thicknesses, the drum will produce two different tones.T...
- My Journey As A Scroll Saw Pattern Designer - 1598 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 96 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1623 entries
- frank - 417 entries
- degoose - 397 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 279 entries
- William - 258 entries
- Betsy - 221 entries
- shipwright - 218 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 198 entries
- Rustic - 188 entries
- BritBoxmaker - 187 entries
- Chris Davis - 183 entries
- Smitty_Cabinetshop - 176 entries