Why I wanted to Build a Moxon Vise Work benches are low. When I was first learning about traditional woodworking, I noticed how low my friend’s workbench was. He informed me that the lower benches were better for hand planing. This is true, but sometimes you just want to work with something at a higher height, for instance cutting dovetails. This is part of the reason why I found the idea of a Moxon vise so appealing. It’s a large, double-screw vise that is detachable from ...
When I ordered the BenchCrafted hardware I also ordered the hardware for the Moxon vise. Not only was I inspired by BrandonW’s bench but also his Moxon vise. So, it has been sitting in my shop for about nine months. Brandon’s Moxon Vise The plan is to make a Moxon Vise Bench-top Bench because when I doing fine work I find myself slumping over for extended periods of time. That kind of zaps the fun of it after a while. Furthermore, I admit to being spoiled when comes to h...
Still waiting on my oil to entirely dry. Meanwhile, I thought I would fix something that I knew would bug me all the time. My big honkin’ wooden vise jaw is too massive for the few inches of threading in the big wooden nut in the leg vise, and as a result the big wooden screw tilts downwards towards the jaw. See look: here in the very back of the leg you can see the nut: The nut is actually not glued into the leg at all; it’s merely held in place by those blocks that are...
I hav had these power press bar clamps for over a decade forgotten in a bin and used them for the first time today. they are nice! nicest pipe clamp I’ve ever used. what a shame they were discontinued after Irwin bought the company. (aside: I’m not happy with Irwin, they’ve ruined Marples chisels) I’m wondering if I can use these to make a Moxon vise? here’s a quick sketch to be followed with a slow sketchup…
Wow, that was tedious. Sawing through a 6” x 6 1/2” with a ryoba was no joke. Then I had to flatten the bottom. Not too bad. Creating the chamfers on the bottom of the legs was fun, though. Then I weighed the leg with my luggage scale just for kicks. All four legs are done. Next: fitting the long stretchers! P.S. The post title is my general feeling after seeing my legs lying horizontally on the ground for such a long time. It’s good to see them upright!
My dear LJ friends and community! Please tell me what you like/dislike about this idea. the thought is to make a roubo workbench out of 4×4 nominal lumber (Lowes has 4×4 doug fir for about $1 a linear foot) This will be my first of two roubos, so this one is practice. The second will be “true to Schwarz” and made from big timbers with a big wooden screw (from Erie) and a real wagon vise (probably from bench crafted) – but this first one will have a metal scre...
as usual i am doing this backwards designing the bench before the vise. so here’s the plan build a smallish but tall bench for handwork and sharpening make it compatible with a moxon vise i’m calling it my moxon bench this is 36” x 24” – i may go wider and a bit shallower, still deciding…
Thanks, everyone, for the kind words about my Moxon Vise. I enjoyed making these handwheels, but, man, it was difficult! Someone asked me how I secured the vise to my bench. Most Moxon vises I’ve seen are secured to the bench with clamps. I didn’t like the look of that. Also, I wanted to be able to “install” the Moxon vise in one step. My bench has ¾” round dog holes, so I drilled holes into the underside of the fixed jaw and inserted ¾” oak dowels. I designed it so the dowel on the right...
Today I lopped off the extra 1” or so from the tops of the leg tenons (are those called horns?), which was harder than I expected. Then I chopped the dovetails on the outer leg tenons, which was easier than I expected. In case you’re wondering, I started the cut with my dozuki and then when the back of the saw started hitting the top of the tenon, I switched to the rip side of my ryoba. Piece of cake, quite honestly. I’m going to glue up the last four boards (two on e...
jointing 6’ long 4×4s on a little benchtop jointer is part crazy and part gymnastics, cursing helps, but patience helps more. as tough as trueing the reference face is, squaring the second face is the real challenge. at times nearly all the weight was hanging off the end with all fingertip strength focused on keeping the ref face on the fence. but my little cast iron craftsman continues to impress. felt like i was channeling Rob Cosman as i checked each piece with winding stick...
- My Journey As A Scroll Saw Pattern Designer - 1043 parts
- Extremely Average - 325 parts
- Daily Update - 87 parts
- A journey into the workshop. - 85 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Just for Fun... - 72 parts
- The Craftsman's Path - 67 parts
- Workshop Development - 64 parts
- 52 Weeks - 52 parts
- Sheila Landry (scrollgirl) - 1065 entries
- frank - 417 entries
- degoose - 384 entries
- Ecocandle - 326 entries
- dbhost - 318 entries
- Martin Sojka - 294 entries
- Karson - 288 entries
- MsDebbieP - 283 entries
- Betsy - 221 entries
- William - 214 entries
- Gary Fixler - 204 entries
- Stevinmarin - 198 entries
- mafe - 188 entries
- Chris Davis - 183 entries
- Todd A. Clippinger - 182 entries
- Rustic - 182 entries
- PurpLev - 159 entries
- BritBoxmaker - 146 entries
- scottb - 144 entries
- kosta - 144 entries