Info on the Camera Boom I’ve been using for several weeks now. And more uses for the ceiling mount rails installed around my shop. Watch the video.
I just went over some old pics and noticed I never officially posted this one, so here it is. This is how I have my bar clamps stored and organized (by length) at eye level so that even if one falls, it won’t do much damage (to me) as well as making it easy to reach and grab what is needed: Cheers!
I needed to install my VHF radio in my Montgomery 17 sailboat and I wanted it to be mounted into a bulkhead. To do this I needed to build a little box insert to bolt the radio to. It turned out nicely and was a fun project. I made a video of it mainly for other sailors in a simular position but figured I would share it here since it is woodworking.
It’s snowing here so Its out of the unheated shop and staying indoors – good time to make the blade clips. I chose to use stainless steel because I waned a material that won’t rust, be strong and capable of sustaining the blade tension, and I like the color (not a big fan of brass although I do like it as an accent in some cases). I ordered some 1/2” stainless steel rods from Speedymetals a while back for no real reason when I ordered some other material as it was o...
I think I’m going to end up with several Bench SlideMounts. They’re exactly what I didn’t realize I’ve been looking for. I’ve been dragging my heels on a bad idea I’ve had to install T-tracks in my 8’x2’ work table, seen here almost 2 years ago when the garage was still nice and empty and traversable. I’d make a shelf below the bench to hold my smaller bench tools on squares of plywood, bringing each up as needed, sliding its bolts into...
I saw this FWW Complete Illustrator Guide to Woodworking, and while I found most of the book to be mediocre (although a nice reference book when you’re starting woodworking) I did pick up a couple of cool ideas from it… then again, it might have been from a different book…lol so I finally mounted my (until now just laying there) hand planes in the cabinet. The shelves are shaped to the profile of each handplane for full support, the shelf has a small ‘step’ (1...
I like the challenge of building an item of my own design that perfectly fits my needs. The apartment in my shop has a loft, which is our bedroom. I wanted to purchase a ceiling mount for my TV to hang at the foot of our bed. The ceiling is very low (6 ½ feet) and we could not find a mount that would do what I wanted to do, for the price I wanted to pay… So, lets make our own!!! I need something that will hold my small LCD Television and my satellite receiver as close as possible to ...
- My Journey As A Creative Designer - Woodworking and Beyond - 1738 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 98 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 78 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1763 entries
- frank - 417 entries
- dbhost - 410 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 303 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 239 entries
- Betsy - 228 entries
- robscastle - 217 entries
- stefang - 215 entries
- Stevinmarin - 212 entries
- Dave Rutan - 210 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 193 entries
- Rustic - 190 entries