You’re motoringWhat’s your price for flightIn finding mister rightYou’ll be alright tonight My choices were between a single speed, 1/3 HP, 1750 RPM motor or a three speed, 1/4 HP, 1050 RPM motor. Wow, 3 speeds! The 1/3 has a very short shaft meaning I could only fit one pulley meaning I would have to slide the motor to each lathe pulley (or I could have used a jackshaft but I was too stupid to know it). The 1/4 has a longer shaft to fit a step pulley and did I mentio...
Hi Lumberjocks, I need some help diagnosing an issue I’m having with my dust collector. Recently my dust collector started tripping the circuit breaker and running with a lot of vibration. Initially I thought it was the impeller that was out of balance, but now I’ve at least narrowed it down to the motor (after wasting $80 on a new impeller). This first video shows the motor running completely assembled…and then the noises that follow as it shuts down… ......
Wow, what an afternoon yesterday. I’m finally getting to see things shape up when I was removing the masking tape. Then I get to the tape that was covering the PATENT sticker that I couldn’t remove… I’d had the masking tape on too long and when I was removing the tape, along came the sticker… So naturally I was upset…very upset. It’s not like this little sticker would at all affect how my machine works but.. My Grandpa has two main hobbies, woo...
Haven’t done a whole lot lately, finished all the wire brushing and removing of the old pant and rust. I had to stop using the wire wheel when there was more wires flying off then paint. I got my use out of the $3 wire wheel. There’s still some paint in those hard to reach places but It’s better than it was. Now I’m going to give everything a good wiping with some mineral spirits and tape off what’s necessary and go to town with the spray cans. I took some pictur...
Well, I received this table saw for FREE several years ago, when a friend backed into it in the garage…. the table is solid cast Iron with Webbed wings, so that was undamaged, but the motor mount was trashed. It was her grandfathers saw, and she just couldn’t throw it away. She let me have it, since I promised to get it working again and to use it. I got a BEEFY motor from the Ex’s uncle who’s an HVAC installer… Cost… a case of beer. God bless BEER! M...
This journey started out with me asking a question about what I could do (woodworking related) with a blender motor I salvaged. See the forum topic here. Cranesgonewild (an LJ member) gave me a link to a project another LJ member had posted. Here is that project by Filinvested. The project is like a rock tumbler (for polishing rocks), but instead of rocks it takes cubes of wood and turns them into beads of wood. Pretty ingenious idea. So I decided to make one. My mother and stepmother ...
Continuing to work up the saw I got the next big chunk of work done, the motor and the motor carriage. I followed pretty much the same process I used while doing the base. Like I said before, this saw is in great working shape and had been used daily by the gentleman that had it before. I both the motor bearings and track bearings had already been replaced. They were in good shape so all I needed to do was give them a thorough cleaning. I also hand painted the embossed DeWalt logo ‘k...
Well, today I did get to come home at lunch and dust out the motor, and let me tell you, it looked 40 years younger when I did. The windings were actually nice and shiny underneath the layers of old sawdust….. With that out of the way, I was able to move on. I pressed the new bearings onto the arbor using a deep socket and rubber mallet to tap them into place. With that out of the way I put things back together in the manner I dis-assembled them. Since, I didn’t make no...
I bought a Powermatic 66 at an online auction web site. I paid $350 plus $135 processing. After rental of a truck I drove 158 miles to York PA to pick up the saw. Upon my arrival back, I set up the mobile base, slid the saw onto the lift and moved it into the shop. We pulled the motor, pulled the worm gears, blade, wheels and everything else. I sanded away all the old paint, and repainted it with the closest color I could find. It had a hammered look when dry. The magnetic switch was mounted ...
I just picked up a 1 1/2 hp 1740 rpm motor from a friend today for $30. It’s a VERY clean old Doerr brand motor made in Cedarburg, Wisconsin. After rewiring it to run in reverse, I installed it into my rigid 14” bandsaw that has a 6” riserblock, and many carter upgrades. Let me say that the saw is a totally different beast now! With the underpowered stock 3/4 HP motor, a very slow feed rate was needed to resaw tall stock. Now it breezes through 10” rock maple withou...
- My Journey As A Creative Designer - Woodworking and Beyond - 1832 parts
- Extremely Average - 324 parts
- Toy costruction - 131 parts
- A journey into the workshop. - 115 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Woodworking on a Half-Shoestring - 91 parts
- Shop stuff - 90 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 82 parts
- Sheila Landry (scrollgirl) - 1857 entries
- dbhost - 455 entries
- frank - 417 entries
- degoose - 398 entries
- Ecocandle - 325 entries
- mafe - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- Dave Rutan - 277 entries
- robscastle - 267 entries
- shipwright - 259 entries
- William - 258 entries
- A Slice of Wood Workshop - 241 entries
- bandit571 - 237 entries
- Betsy - 228 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries