LumberJocks

Woodworking blog entries tagged with 'mortice'

  • Advertise with us
View WoodAndShop's profile

How to Make Mortise and Tenon Joints with Hand Tools (VIDEO)

54 days ago by WoodAndShop | 3 comments »

HOW TO MAKE A MORTISE AND TENON JOINT WITH TRADITIONAL HAND TOOLS This video and article will simplify the process of cutting mortise and tenon joints with only a few traditional hand tools. With a little practice, you should be able to make a mortise and tenon joint in under 10 minutes! The video is a quick tutorial, but the below photos and article will clarify how to make a mortise & tenon joint in great detail: ANATOMY OF A MORTISE AND TENON JOINT: WHAT ARE MORTISE...

Read this entry »


View WoodAndShop's profile

10 Steps to Getting Started in Traditional Woodworking with Hand Tools #9: |Step 8| Joinery: Learn how to Layout & Cut Joints

128 days ago by WoodAndShop | 0 comments »

People called “Joiners” cut joints in wood, in order to get the wood to fit (and stay) together. There are many, many different joints for many different applications. I’ll keep adding joinery videos below (I’m starting with the more basic joints and will move on to more complex joints), so keep checking back. Before watching the videos, checkout this cool woodworking joint chart! (credit: David Royce). 8.1 Learn How to Cut Dovetail Joints Here’s a very detailed 15 step video t...

Read this entry »


View BJODay's profile

Trying new woodworking skills #16: A tighter miter

193 days ago by BJODay | 13 comments »

It has been 2 months since I worked on the project and posted any progress. In the last entry I was happy with the first mitered top. But over the holidays I would look at it and think, I can make it better, (a tighter miter). The first top was cut at 45.2 degrees. There was a slight gap in the joint. I ran a few test pieces through. I adjusted the miter sled by 0.05 degrees. I’m not kidding. The best tests were at 45.15 degrees. If I was working in pine, the first cuts could have be...

Read this entry »


View RGtools's profile

Occasional Table Class (Hand Tool Build) #22: Cutting the Joinery for Your Table

948 days ago by RGtools | 14 comments »

First off since you are working on furniture…clean up your bench. Sweep it off and put the tools away. This may seem odd since you are going to take the tools out again but it’s not, you are going to pound on your work quite a bit during this process. Chips left on your bench get wedged under your work and dent it. Sweep your bench off and keep it clean. I put all my tools away after each joint is made to fit, this speeds things up because you are not fishing for tools you thought...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase