Grandma's Picture Frame #3: Zero Clearance Take 2: Using a Molding Head on the Table Saw, Safety and Other Thoughts
In the last blog entry, the table saw molding cutter fiasco was discussed. After some feedback, and encouragement, and trust that the mishap was partly due to a knot in the wood (WHO PUT THAT THERE!), I went back and reworked the Insert. This time I made it slower, neater, and let the cutter itself remove the kerf by very, VERY slowly raising it while the fence held it down. If you do this, please use a cutter that has both outside edges; otherwise, you may not have created a universal slot f...
