LumberJocks

Woodworking blog entries tagged with 'mod'

  • Advertise with us
View nashley's profile

Benchtop Work Holding - Handscrew Clamp Modification

01-20-2015 12:38 AM by nashley | 2 comments »

This will be my first post on lumberjocks so I thought I would start with something simple. I’m in the process of gearing up to make a set of dining chairs and was looking for a way to secure work to the top of my bench. I drilled some thru holes in the top of my bench that will allow the clamps to be oriented towards the front or towards the side. I’ve seen bar and pipe clamps used this way but I don’t think I’ve seen handscrew clamps used this way. The bottom jaw ...

Read this entry »


View Cory's profile

Evolution of a Shop #8: HFDC Upgrade

03-06-2010 03:04 PM by Cory | 7 comments »

I have been wanting to get a trash can separator for my Harbor Freight dust collector since I bought it. I still don’t have the separator built, but I did make a great improvement to the unit, IMHO. I’m sure many of you have seen the stovepipe mod, or the Delta collector with room underneath the blower for a separator where the motor and the ring are in line. I wanted to try the same thing on the HFDC. The challenge is that the DC motor is really heavy and I wanted to keep th...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com