840 days ago
by Don |
22 comments »
I blogged a couple of weeks ago about what I should charge for a small box I was asked to make.
I thought that those of you who haven’t delved into the wonderful world of box making might like to journey along with me as I make this commissioned box. I was given the outside dimension for the box, as the owner intends to place it in a chest of drawers, so it must fit the size constraints of the drawer. The box will be 95mm high x 360mm wide x 240mm deep (approximately 3.75” x 14...
Read this entry »
910 days ago
by WayneC |
16 comments »
David posted pictures of his new miter gauge and was looking for some pictures of other miter gauges. I commited to show some pictures of my Jessem miter guage.
The first step in using my table saw is removing the Peacock. (Deb has named him LJ).
The box on top of the table saw is a Biesmeyer Over Arm Saw guard that is waiting to be installed.
On to the miter gauge. It is a JessEm Mite-R-Excel. It has a 24" fence and can extend to 36" The gauge has a Dual-Indexing Angle Location ...
Read this entry »
446 days ago
by CraftsmanCollective |
15 comments »
So in my first blog entry I touched on my dust collection progress. I’ve recieved a bit of interest with it so I thought I might share some of what I’ve learned to help others get a head start on thier system or to improve the system they already have. I’ve spent a ton of time researching and testing this stuff and can geniunely say that what I post here works exceptionally well. I do alot of work with MDF and we all know of the hazards of wood dust, especially MDF. Im ...
Read this entry »
814 days ago
by Gary |
16 comments »
This was requested from multiple sites, so I did one for everybody.
Here’s some photos of my process;I only had enough time to do a two-ring knot, but it’sall the same to make a four-ring knot accurately if you follow these steps.
This shows the miter sled, the length of contrasting wood for the slices, and the bloodwood blank I’m going to use.
I’ve already squared the blank so that all four sides are the same size.I randomly pick a side and mark it 1.Side 2 i...
Read this entry »
566 days ago
by Woodhacker |
13 comments »
When I returned to woodworking several years ago my nephew had been talking about a particular style of “coffee” table he’d seen online somewhere and was describing it to me. Since he’d just announced plans to marry, I told him I’d make him, and his fiancée, the table as a wedding gift.
He showed me some online photos of the table, which I used as the basic, general design plan. The joinery I chose is original but the style was taken from the photos.
This piece is the result:
...
Read this entry »
910 days ago
by mot |
12 comments »
I wanted to add to the mitre gauge posts. Wayne posted a photo tour of the Jessem System, and David posted initial impressions of the Kreg System.
The incra 1000SE is seen here in the Incra Miter Express sled. Both are available at Woodpeck.com You can see the kerf where the mitre sled straddles the blade in the tablesaw allowing for the cutoff piece to be coplanar with the workpiece. This decreases the chance of the saw flinging the cutoff piece back.
The Incra guage is adjutab...
Read this entry »
236 days ago
by John Nixon |
6 comments »
I just completed the latest video in the Super Sled series – the Miter Fence. Cut accurate and reproducible miters with this shop made miter fence designed for use with the Super Sled. Using a stop block for repeatable cuts allows you to get the exact same size pieces each and every time you miter. This versatile setup can cut a wide range of angles safely and accurately on the table saw. The Miter Fence video for the Super Sled series shows the construction of the fence and two dif...
Read this entry »
408 days ago
by mhawkins2 |
7 comments »
I am beginning to think that a dead on PERFECT miter is about like big foot or the Loch Ness monster. We’ve all heard of it, a few claim to have achieved it, most of us probably don’t believe it. I am an engineer in occupation and by nature, so when I say perfect; I mean PERFECT. Dead on 45 degree not 44.99 nor 45.01. The vertical face of the wood is completely vertical as is the blade so the sides don’t tilt. And the wood is absolutely of consistent thickness so the re...
Read this entry »
191 days ago
by bigchopperoo |
14 comments »
Do you watch that UGLY BETTY show?
I don’t. I don’t even have a TV! Well… if they made one completely out of wood, I’D BE THERE!!!!
But… if I did, I would probably not watch that show anyways…. only because I have something BETTER than an Ugly Betty!
I have the UGLY BETSEY!!!! And let me tell ya boyz, she’s SWWWEEEEEEET!!!
Come on in and let me show you how to build the woman of your dreams!
Read this entry »
527 days ago
by John Fry |
20 comments »
This very large, commissioned credenza was designed as an entertainment center to sit below a big, wall mounted, plasma TV. It is 76” wide 24-1/2” deep, and 34” tall. The cabinet and base are all solid walnut and the doors are bookmatched walnut burl veneers both inside and out.
But first I want to thank everyone who visited and responded to my last blog;
A glass top table with opposing arches
And as always, I welcome your comments AND critiques on this latest project.
The mai...
Read this entry »
1 2 3
26 entries
