LumberJocks

Woodworking blog entries tagged with 'miter saw'

  • Advertise with us
View thiswoodshop's profile

Dust Deputy for my shop

09-16-2011 06:29 PM by thiswoodshop | 18 comments »

With all my wood turning and saw dust that is generated in the shop that accumulate rather quickly I needed something that wont clog my vacuum every time is vacuum. I was searching around in the Google Search engine and found The Dust Deputy . I used a Home Depot bucket and my Ridgid vacuum cleaner. This system has proven to very satisfactory and does a great job. I almost never have any thin in vacuum cleaner. I just mounted the system on a simple 2×4 and plywood cart.

Read this entry »


View WoodJediNTraining's profile

Make a Screen Printing Press to Print T-shirts in the shop or at home

09-19-2012 12:11 AM by WoodJediNTraining | 5 comments »

Along with Woodworking, I enjoy a new hobby, Screen Printing T-shirts. I started a New Foundation for woodworkers Across the globe to unite and connect. And I am starting to print T-shirts for the UFOWW and found a need for a screen printing press. So here is a look at that build Also I had a short follow up on some notes about the press and why im posting a day early..

Read this entry »


View WoodJediNTraining's profile

How to build a Desktop Art Easel

02-01-2012 04:20 AM by WoodJediNTraining | 4 comments »

How to build a Desk Top Easel Recently I built a desk top art easel for my mother for Christmas, She requested one from Santa, but since he is busy making toys for all the boys and girls, the task was up to me. This Easel is a great gift for the artist in your life. A fun build and a beautiful piece. The easel is made of Walnut and Oak it features two trays which can hold all of your paint supplies, as well as a paint pallet made from birch. The brass hardware and Oak Splines really set...

Read this entry »


View John Steffen's profile

Garage Workshop Transformation #2: The Ultimate Tool Stand

07-19-2010 04:15 PM by John Steffen | 7 comments »

As evidenced in my first post in this series, I have a severe lack of organization in my garage/shop. Two weekends ago I threw up some shelves with my ‘chop saw’ (that’s for you Don) so we could get my soon-to-be wife’s side of the garage organized. That was a quick and easy project, and we (mostly she) got that part of the garage in tiptop shape. Well last weekend she wanted me to start cleaning my side (two thirds) of the garage. We’re getting married in Se...

Read this entry »


View dreadpirateeric's profile

Miter saw bench

10-15-2010 10:42 PM by dreadpirateeric | 6 comments »

My miter saw station. The middle section might be versatile and house other tools that would benefit from a larger out-feed table. Project Status: Lumber Purchased

Read this entry »


View Metrotek's profile

LOOK AT THESE ROUTER LIFTS

02-25-2012 07:12 PM by Metrotek | 4 comments »

Take a look at these router lifts, they are so cool. http://woodgears.ca/router_lift/index.html http://woodgears.ca/router_lift/version1.html I’m going to build one after I purchase a new table saw this week. I’ll just have to eat sparser but I have to have a saw.

Read this entry »


View sIKE's profile

Miter Bench and Storage #1: Getting started with the base

03-14-2008 11:22 PM by sIKE | 12 comments »

Finally got started on Norms Miter Bench and Storage. I had previously rough cut the base components so thankfully I didn’t have to break down six sheets of 3/4 ply. I started with the rabbits and the dado’s on all of the pannels. Note, the rabbits (when called for) go on the back not the front of the panel, most important on the right cabinet (scratch one panel). Then used a template to cut the notches and hole in the back for dust collection (scratch the same panel the second t...

Read this entry »


View DarrylF's profile

Slotted Folding Chair #1: Plans For Building

12-20-2011 03:57 AM by DarrylF | 11 comments »

Hello everyone, a few people have asked me for plans on how to build the folded slotted chair I made so I decided to give it my best shot to measure the pieces and give a description on how it was done, so here we go. Wood Used: Ash Parts List:1 1/2” x 3/4” x 48”: 21 1/2” x 3/4” x 38”: 21 1/2” x 3/4” x 36”: 71 1/2” x 3/4” x 34”: 21 1/2” x 3/4” x 15 3/4”: 91 1/2” x 3/4” x 6”: 12 ...

Read this entry »


View MoshupTrail's profile

Crosscut Sleds Made Simple #1: Thinking about making a sled?

01-09-2012 05:18 AM by MoshupTrail | 4 comments »

I can make a crosscut sled in about an hour. I put this off for a long time and when I finally did it, I wondered why I waited so long. No, it won’t be fancy, but it will be functional and accurate. Here’s the first one I did: The basic crosscut sled was so easy that this weekend I made a 45 degree miter sled. SO, WHAT’‘S THE SECRET? It’s simple. The only thing that has to be carefully measured is the angle between the saw kerf and the refe...

Read this entry »


View Kerux's profile

Segmented Pen

01-16-2008 12:28 AM by Kerux | 7 comments »

My version of Ron McIntire’s segmented pen. This just happens to be the way I do it… that best fits how I think through the process. I’m sure there are many other variables in getting the same end. First of all I make a checkerboard blank. The one in this Tutorial is Paduak and Maple. (It works best with contrasting colors). The next step is to cut the sections in equal sizes. I made a ‘zero tolerance’ jig for my miter saw that helps me cut all the sections. In order...

Read this entry »


« prev 1 2 3 4 5 6 7 8 ... 72 next »
713 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com