LumberJocks

Woodworking blog entries tagged with 'miter saw'

  • Advertise with us
View PhilBello's profile

Life as an Amateur Woodworker #28: Carport

10-14-2014 12:41 AM by PhilBello | 4 comments »

I recently decided that I would retire gracefully from motorcycling, I bought a new bike in March and have only done 500km due in part to the weather, and probably more importantly due to the horrendous standard of driving in Colombia, there isn’t a day when I am out in the car that I don’t pass at least two accidents involving motorcycles. So the bike is being sold, and I have purchased a 1982 Suzuki SJ, which I am more than happy with, but it came with it’s own problem...

Read this entry »


View Philip "Pip" Storm's profile

Kitchen Cabinets #2: Been a while

08-23-2012 08:58 PM by Philip "Pip" Storm | 3 comments »

Sorry it’s been so long since I’ve had any updates. I’ve been very busy. The cabs have been installed minus doors and drawer fronts. Toe kick and drawers are in, so the kitchen is now usable. Here’s a few picks of the some of the upper doors before finish. I’m actually in the process of finishing the doors as I type. Maybe in a week or so I can post some pics of the cabs on the down hill side.

Read this entry »


View brianb6603's profile

Small workbench based on shipbuilt's Short Block V8 (Workbench Challange) #2: The Tops

03-16-2015 12:55 AM by brianb6603 | 3 comments »

Well, the tops have taken longer than I anticipated. But it has turned out nice. The original Short Block V8 designed with a Torsten box top but I wanted a solid top. After lots of consideration I decided that I wanted the top to be Baltic Birch laminated on edge for the top. This would be consistent with the leg construction and would make for a very solid top. However this presented an issue as Baltic Birch is not cheap (best price here in Oregon, USA is $55.00 for a 5×5’ sheet...

Read this entry »


View JimDaddyO's profile

Shop stuff #22: A board of Cherry

12-22-2015 06:13 PM by JimDaddyO | 0 comments »

The start of building a Christmas present. Getting thing roughed out and thinking about sizes. I opt for hand tool work many aspects and use machines for things I don’t want to take a chance on. There are certain places that the machines are still required. I don’t think I will ever get rid of them and go totally hand tool, but I keep experimenting to build my skills. Also, trying to embed the video for the first time, we will see if it works. View on YouTube

Read this entry »


View ToddMKS's profile

Stanley Miter Box Restoration #1: The Project Start

04-17-2013 09:32 AM by ToddMKS | 2 comments »

I picked up a Stanley Miter Box no. 346 at a swap meet this past weekend for $15. As you can see it is in pretty bad shape. The saw blade is completely rusted, the handle is in good shape. I can see some markings on the blade but cannot make them out. I will be taking the saw apart and coating it with Navel Jelly to remove the rust. I will be leaving the handle as is, I like the look. More to follow.

Read this entry »


View NedB's profile

Tool thoughts #31: Happy Birthday - the report

08-15-2012 10:00 AM by NedB | 11 comments »

Morning all, Well yesterday was my birthday, and my loving wife and kids gave me two tools, plus some clothes. Since I doubt you LJ’s would care about the clothes, here are the new tools: Just an 18v Jigsaw (with laser sight) and a countersink/driver bit set. Not earth shattering, but they’ll be well used out in the shop. I have a relatively complete kit of Ryobi One+ tools, so I’m well stocked with two chargers and several batteries already. Now I just need something ...

Read this entry »


View 559dustdesigns's profile

four station desk #1: First look

06-23-2010 10:43 AM by 559dustdesigns | 3 comments »

I’m now working on a couple of desks for a Medical clinic. I’ve been working on this project for about 13 days now. I built this unit out of oak plywood and red oak lumber. I started this project by constructing the the upper portions first. I had to wait to receive my hardware before building the base cabinets. This set of desks is custom for the client, the first desk station on the left is 50” wide than there is (3) 40” wide stations one of the stations is going to ...

Read this entry »


View JimDaddyO's profile

Shop stuff #79: Mail and Key organiser

02-14-2017 06:13 PM by JimDaddyO | 0 comments »

Tired of coffee table videos yet? I took a break from editing it and put this one together. Yes, a complete build in one video! My niece needed a key and mail organiser for her new home. View on YouTube

Read this entry »


View tooldad's profile

Woodworking Safety #1: Introduction and my intent

08-30-2008 03:07 AM by tooldad | 15 comments »

I have a suggestion from one of my senior’s in my classes, also a LJ (tooldads_apprentice), to post podcasts of safety lessons as we do them during class on LJ. This would allow students to review or makeup safety packets if they were absent during demos. I thought great idea and am going to take it a little further. I am going to enlist the aide of our video production class to help produce the videos. Look out Wood Whisperer!. Episodes will include, hopefully, 1-General Shop Sa...

Read this entry »


View JeffMartineau's profile

Jigs #1: The Super-Awesome-Tuberculosis Curing Crosscut Sled

07-13-2015 04:58 AM by JeffMartineau | 7 comments »

Oh my! You guys have no idea how happy I am right now. It took about two weeks, a digital angle finder, a dial indicator, a new Biesemeyer fence, table saw extensions, and a lot of sweat, but this crosscut sled is done! Well, almost. Still have to build accessories, paint it, and make it look all pretty and whatnot, but at the very least, I can use it to cut, or more exactly to crosscut. You are probably wondering how on earth can a simple sled make a guy this kuckoo right? It is by no mea...

Read this entry »


« prev 1 ... 37 38 39 40 41 42 43 ... 73 next »
721 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com