My wife and I have recently found out we are expecting. Once I knew, I just had to make something for my wife and soon to be child. I know it is great to have a rocking chair in the baby’s room to rock them to sleep. I have always liked the look and movement of glider rockers. I figured it was the perfect opportunity to build one. I got the core plans from Wood magazine’s issue 112. I followed the plans for the chair pretty much exactly. Due to the low p...
It’s done! She waited through 2 birthdays, 1 anniversary, 1 Christmas, and 1 Valentine’s Day… but it’s finally done, and she seems to feel that it was worth the wait. /phew! For all the details of each step of the project, head on over to my woodworking blog . Otherwise, click over to my LJ Project page and check it out.
Sorry for the delay. It’s been a busy week. For all the details, head on over to my woodworking blog . In the meantime… here’s the next set of progress images… I finish assembling the drawers and fitting them to their bays. Not piston-fit, but as close as I’ve ever come. I can’t stress how important it is to take your time at this step. Take super light passes off the sides of the drawers and keep retesting the fit to the point of insanity. As so...
And we’re back! Our specials today are: Carbide-tipped bandsaw blades with a side of Stickley’s Aurora finish. For appetizers we have some bookmatched door panels and invisible hinges. Our entree this evening is a large stack of hand-cut dovetails. For all the details, head on over to my woodworking blog . In the meantime… more photos! I bought a Lennox Trimaster Carbide-tipped Bandsaw BladeNot pictured, but it’s super amazing! Makes my bandsaw cut like a t...
Welcome back to one woodworker’s flirtation with insanity by way of making a Jewelry Armoire for my wife. I’m happy to say that I and all of my new personalities are really glad to be done with this project. For all the details, head on over to my woodworking blog . In the meantime… on with the show! I didn’t want to use a table saw to cut these grooves, so I had to make a sticking board I got a little overzealous with the plow plane, slipped, and cut m...
I completed the project last night at 9:30pm but was too tired to take decent photos. In the meantime I’ll entertain you with a few highlights from the past 8 months. If you want the full details, feel free to head on over to my woodworking blog Quadrilinear legs and a dovetailed top frame: Beaded & Shiplapped backer boards: My ridiculously detailed Gantt Chart project timeline Flattening the top Carefully marking the mortise locations on e...
Hi everybody, I’ve been attempting to record as much of the process of designing and building a Jewelry Armoire / Lingerie Chest of drawers as I can manage. The effort to document the work on my personal site is already substantial, so I wasn’t able to duplicate the blog posts over here. I started this project on 11/1/2013 and am 2 days from completing it. I’ve lived with this project in my brain for so long now that I have mixed feelings about being done with it. It&...
Aubrey eagerly sported her tool belt with tucked-in hammer. Everything about her said, “Let’s go build something daddy!” She was ready for anything and wanted to prove she could tackle anything her brothers could – and more. The “weekend” basement remodeling project had morphed into a 2 year marathon. We’d finish one part and my lovely wife would come down the stairs oohing an aahing about how good it looked. Then I’d hear those dreaded next words “But babe, that old _ (insert “w...
This is where we left things last time…-----I built the small single drawer with half blind dovetails at all four corners. -----I installed a 9” full extension undermount drawer slide. I use a hardwood shim between the drawer bottom and the slide. I plane the shim to fine tune the fit of the drawer in its opening. -----Drawer installed.-----The drawer bottom is aromatic cedar.-----Here you can see the blocking that was added to receive the drawer slide, and the figure 8 fasten...
Here is my cherry refreshment table which will feature a single drawer and breadboard ends.-----I started by making breadboard mortises at the router table. The mortises are 1-1/4” deep and cut in multiple shallow passes. -----I used a 1/4” spiral bit to center a 3/8” groove in the breadboard ends. I made an initial pass in the standard right to left direction. Then I flipped the board end for end and made a pass from left to right to avoid a climb cut.-----I set up my t...
- My Journey As A Scroll Saw Pattern Designer - 1407 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- Just for Fun... - 86 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- Sheila Landry (scrollgirl) - 1431 entries
- frank - 417 entries
- degoose - 394 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- mafe - 230 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 195 entries
- Rustic - 186 entries
- shipwright - 185 entries
- Chris Davis - 183 entries
- stefang - 174 entries
- BritBoxmaker - 168 entries
- PurpLev - 163 entries