886 days ago
by Dorje |
19 comments »
I’m posting these pictures as a means to get bloggin’…and, because I’m interested in milling and drying lumber (on a scale that I can accommodate – in the backyard). I’m also brand new at it, so it’s just fun to share! I would have liked to have photos or video of this ‘small time’ sawing in the backyard, but wasn’t quite there yet!
Inspired by Bob’s forum topic post the other day on the craigslist cherry crotchwood, I took some pics of some crotchwood I cut in April…
A couple p...
Read this entry »
731 days ago
by Dorje |
24 comments »
Here’s a little more ‘milling around’ for fun:........
This board turned out to have some really interesting spalting…........
And, upon closer examination:...........
One with our stacks:........
And our final parting shot! ........
This concludes the milling process. What a blessing it was to have Mike’s support in this process. I can thank LJ for that! And a HUGE thanks to Mike directly! That was a lot of fun last Wednesday. Just amazing what can come f...
Read this entry »
736 days ago
by Dorje |
15 comments »
On the same cold, crisp, gorgeous day in Sunny Seattle…the next thing we did was mount a 2×12x12 to the top of the 1st half of the maple log as a guide board to establish our first flat face from which we could continue to cut with just the chainsaw mill. The 2×12 had 2×2 runners screwed on to it to keep it flat and a wee bit more ridgid. One hooked over the edge, while the other was inset a few inches to “shim” the board to “level” it out (all ...
Read this entry »
735 days ago
by Dorje |
23 comments »
After the slabbing cut, we continued to cut the first half of the log. Here’s a short video of Mike on the saw…....
....
After a few cuts we hit a nail…pulled the saw out and cut from the other end…chipped a tooth but nothing really terrible; the chain was still relatively sharp, so we continued to cut!............
Here’s the spalting a bit closer up…it gets even better in the 2nd half!.......
....
A bookmatch shot for fun…........
MORE TO COME!....
Read this entry »
733 days ago
by Dorje |
15 comments »
At the end of this short video you’ll see me look up at Mike. If you listen closely you can hear the saw hit some more metal…....
....
At some point after the next few cuts we hit our 3rd and 4th nails within the same board:........
But, look what we have here!........
Here’s a shot of the “scene” at this point (there’s a few board feet of sawdust):........
We’ll finish up the sawing in the next installment…We uncovered a real gem just a bit ...
Read this entry »
736 days ago
by Dorje |
21 comments »
Well, today was the day that fellow LJ, Mike Lingenfelter, and I got to the milling of that maple log in the next door neighbor’s yard…
After talking the plan of attack out for awhile, we determined that we’d halve the 35-40” diameter log in two, prop ‘em up on edge to mill them. Our reason was simple: the saw, with the 36” bar and 36” milling attachment, would only give us around a 30” wide maximum cut. So, this log was just a bit too ...
Read this entry »
754 days ago
by Dorje |
13 comments »
Another step in the process: I was able to get out and pick up the saw, a Stihl 046, and the 36” Alaskan mill.
I may not realistically get to the cutting stage for another week or two, but the excitement has not passed. I’m looking forward to it…just need to find a whole day that I can take to work on this…and those are rare! I’m also working on a bed frame – so there’s gonna be some juggling of time and resources around here!
Also, I may loo...
Read this entry »
723 days ago
by Dorje |
21 comments »
Last step in the process (well not the last – but close to it – still have to get back over there and paint, or otherwise seal the endgrain, which hasn’t done much in the way of checking with all the freezing temps and the moisture we’ve been getting)
...I set up a level ‘foundation’ for the lumber stack. Made sure it was up off the ground and spaced the beams just under 2ft apart:.........Here’s a couple shots of the progress. My wife helped me h...
Read this entry »
418 days ago
by TreeBones |
5 comments »
I have been building a database of sawmills and put it together as a Sawmill Locater where you can search by state to find sawmills that provide custom cutting services and sell specialty lumber. Locate a mill near you or many will ship lumber if you find they have access to exotic or hard to find species you might be interested in. Please follow this link to search by state: http://portablesawmill.biz/concrete
Read this entry »
780 days ago
by DocK16 |
14 comments »
Christmas came early this year. I was at a WW show in Pgh last month and sprung for a new toy…er …tool that I have wanted for years…..Legacy Ornamental Mill. http://www.legacywoodworking.com/siteMap. UPS tracking # states it is due to arrive tomorrow and quite honestly I’m more excited than Ralphy waiting on his Red Rider BB gun. I know some LJs out there own this tool. I am interested in any tips or shortcuts that might lower the learning curve. Always nice to ...
Read this entry »
1 2
18 entries
