480 days ago
by ganders |
21 comments »
The quick and dirty instructions on how to make a zig-zag pattern cutting board.
Click on the pictures to see a full size image.
Choose a couple different types of hardwood. The more colors the better. Below is cherry, maple and walnut. Rip strips of wood any width so the total with is about 12”. This is the width that will fit through my planer. The beauty of this is that none of the widths have to be the same. The board shown below is made of scrape wood. If you only have shor...
Read this entry »
81 days ago
by poroskywood |
21 comments »
Hey everybody, after a few personal messages here is my version of a how to on a Drunken Checker Board. I of coarse bow to the Chairman of the Board and pay tribute with beer. This is a Off-Checker pattern I call “Drunken Alice in Wonderland” The “serendipitous” nature of this piece is appealing in a far out sort of way. Here Goes…
So first I prepare the Material. I am using Hard Maple and Walnut both are surfaced flat and cut 1” x 9” x 14&...
Read this entry »
515 days ago
by Woodhacker |
47 comments »
After admiring the double and double-double dovetail joints that are capable with the Incra and other jigs, I started thinking, “Why not try this by hand?” So this box is my first experiment with handcut double dovetails. It took me some time to figure out the joinery process, but once I realized a few things about this type of joint, it seemed do-able. It was quite challenging but also a ton of fun. It also does take some degree of patience and precision…which I’m still working on.
In...
Read this entry »
422 days ago
by lew |
6 comments »
I have had so many positive comments and feedback on the Celtic Knot Rolling Pin. Thank you for all of them. Many LumberJocks asked for instructions on how they are made- so here goes. I am a fan of “Cook Book” style instructions so if I miss any details, please let me know and I will try to flesh them out.
I thought it best to start with the jigs I used to prepare the turning blanks. Please note that I always over engineer everything and hardly ever see the obvious or the easy...
Read this entry »
159 days ago
by Andy |
17 comments »
We now have our box body assembled and glued up.Take off the tape and clean off any dried glue.This is a good time to smooth up the bottom to get rid of any rocking.You can double stick sandpaper onto a very flat and firm surface and slide the bottom across that.The problem with this approach is that sheet sandpaper is way too small.You can stick down several sheets and if you go very slow you may not tear the paper.
Tip:I designed this sanding platform for leveling boxes and flushing out ...
Read this entry »
163 days ago
by Andy |
9 comments »
Let the fun begin!
I know everyone is hoping I will just shut up and just get down to the cutting and sanding :)
BUT…..This is very important to those of you who are trying to imitate my process from beginning to end.Many of you have admitted that you have never built a box before and would like to know how to select a winning combination.So,the first bit of business is to select the wood you will be using.This decision will be based on A) what you find appealing.This is totally s...
Read this entry »
312 days ago
by David |
19 comments »
This video features a new crosscut sled built for my shop. Inspiration for this sled came form books in my library and countless Internet searches. This is a simple project for the shop that will increase safety, speed and accuracy of crosscuts on the table saw. Construction is simple with a MDF base, maple fences, Incra Miter Bars and T-Track. The plan file is available for download.
Hopefully this will inspire a sled for your shop!
David
STOP BLOCK DETAIL
FRONT FENCE DETAIL
Read this entry »
70 days ago
by poroskywood |
8 comments »
So having read part #1 I’ll complete the second variation of the Drunken checker board pattern. The process is basically the same except for one critical part and is as follows.
Start again by taping two blanks together. This time In stead of making opposing S cuts I’ll follow the S pattern with each cut. (I get a little sloppy, but it works out OK). Follow the Part #1 procedure.
CRITICAL PART! This step creates the difference between the pattern in part one ...
Read this entry »
151 days ago
by Andy |
15 comments »
Three lid choices.
DO NOT CUT THE LID TO SIZE UNTIL YOU ARE SURE OF THE STYLE OF BOX YOU WANT TO MAKE!
At the start of this tutorial I mentioned that we would look at three ways to make this box.
We are at a point in the project,where we need to decide how we want our lid to open.You will need to look at each type and decide which is your favorite or the easiest for you to make.
I suggest following on with this tutorial and weighing the pros and cons of construction,before making a f...
Read this entry »
99 days ago
by Andy |
22 comments »
This box required a great deal more time and care during the final sanding,mostly in trying to maintain the edge of the ridges.At first I intended to keep them as crisp as possible…which took alot of time…but I didnt care for the look afterwards.It just looked too machine made,not as organic as like.I started out with a concept of sand dunes that I thought would tie in nicely with the grain of the Myrtlewood,but thats about it.I dont try and plan out every detail of the shaping a...
Read this entry »
1 2 3 4 ... 35
347 entries
