Man it really feels good to get out in the cool weather, and continue where I left off last year before my surgury! Well I cleaned up a little bit, soaked my WWII to remove the walnut pitch from the last woodworking project, and got back to work. I didn’t know if I would ever be able to stand again. When I got out of the hospital, and went back to work it was hard to stand, even for a few minutes. See the surgeons remove the vein from your right leg in order to do the bypass. My ...
I’m gearing up for the LOML and son to hit the craft show market in the spring. (my job conflicts, and they’re better salespeople). She wants at least 100 boards of various sizes on hand… here’s the latest batch. Not quite ‘done’ so I’m not posting a ‘project’ of them… that’s freshly after a single wiped on coat of mineral oil. I’ll give them all another session of sanding, then at least two more coats of oil before st...
Hey everyone! I just finished this Video to teach the basics of discovering good figured wood.Hope you like it and would love your feed back and additions. ThanksGregOregonburls
Updated 1/15/12 Now we need to cut a recess in the lid for the medallion to set down into.DONT cut your medallion until you have routed out the home for it.I typically make the medallion about 1” to 1.5” smaller on all sides than the lid depending on the box size and the piece of wood I have for the medallion. We are now going to make a simple jig for a router to set on and run back and forth making several passes of incrementally deeper cuts. There are a several ways to do ...
When I ordered the BenchCrafted hardware I also ordered the hardware for the Moxon vise. Not only was I inspired by BrandonW’s bench but also his Moxon vise. So, it has been sitting in my shop for about nine months. Brandon’s Moxon Vise The plan is to make a Moxon Vise Bench-top Bench because when I doing fine work I find myself slumping over for extended periods of time. That kind of zaps the fun of it after a while. Furthermore, I admit to being spoiled when comes to h...
The camera comes back into the Stumpy Nubs Workshop to further document life in a small semi-professional shop… Includes tips on hand cut dovetails, utility chisels, resawing wide boards on the table saw, glue-ups, and a lot more! This is part 2 of Episode 1. It begins with making the CN Box, then continues the “amazing mini-cabinet marker’s bench”. My favorite part is the footage on cutting tiny dovetails by hand, big ones by machine, and huge ones with a hon...
I guess I’ve been poking along on this project long enough now. Here are some more pictures of my progress for you.~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~Sawing the Fonts, & backs of the drawers.~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~I drilled holes at the drawer bottoms, because of the short sawing radius. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~Gluing the drawer fronts, & backs. ~~~~~~~~~~~~~...
I’ve seen machinist toolboxes here and elsewhere a couple of times, but never felt they would be useful for my woodworking needs as they seem to be aimed at organizing smaller items/tools/etc, so I never paid much attention to these boxes. With my recent interest in machining, I find I need a toolbox to hold all my small gauges, tools, keys, wrenches, tooling, measuring devices, etc. A machinist toolbox would be perfect for the job. I’ve looked around, and to be honest- these b...
I’ve been out of the shop for quite a while for a variety of reasons. Recently, I’ve been cleaning, organizing and reworking storage for my tools. Also, I have been doing some restoration work in the Kitchen. Rebuilding cabinets, refinishing and rebuilding doors. One of the chores that needs to be done is to replace the pull-out cutting board. This is the old one. It fits into this slot in the counter. The only real design changes I am planning is to make the ...
This is why its been awhile since my last post. One of the problems with shaping wood to this extent is any flaws show up. Figured Bigleaf Maple, aka Western Maple, Oregon Maple, Acer macrophyllum, can have pits, bark inclusions, etc… Well, I found a few during the final shaping. I knew I was getting pretty close to maximum depth in one corner, but I couldnt leave that little black spot glaring at me. Then I was all the way through and exposing the bloodwood below, nothing ...
- My Journey As A Scroll Saw Pattern Designer - 1463 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 93 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- Sheila Landry (scrollgirl) - 1487 entries
- frank - 417 entries
- degoose - 394 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- mafe - 236 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- shipwright - 198 entries
- Todd A. Clippinger - 197 entries
- Rustic - 186 entries
- stefang - 185 entries
- Chris Davis - 183 entries
- BritBoxmaker - 177 entries
- PurpLev - 163 entries