Birth of a Powder Horn 101: A Lumberjock’s “Short Version” to Crafting A Powder Horn By Mark A. DeCou (All photos, text, and design is protected by copyright November 12, 2007) www.decoustudio.com =============================== UPDATE 9-25-2012:This past summer I had four students at the John C. Campbell Folk School class on Powder Horn Building and Scrimshaw Artwork. We had a good time together and accomplished some great work. Click the Widget Picture to go ...
A Scrimshaw Art Journey: A Lumberjock’s “Short Version” of the Techniques for Decorating a Powder Horn by: Mark A. DeCouwww.decoustudio.com (This writing, photos, and artwork are protected by copyright by M.A. DeCou 2007-2010, all rights reserved, please ask permission before using any part or component.) =============================== UPDATE 9-25-2012:This past summer I had four students at the John C. Campbell Folk School class on Powder Horn Building and Scr...
Here is an up date on my Green Man. I am not sure exactly how many hours are involved at this point I think around 18 and I still have a long way to go. Not exactly knowing what I am doing is aiding the slowness. This is a huge learning experience for me. One shaving at a time.
Given my recent success with my carving projects. Granted they are simple and beginner level which fits me at this point. However, I have decided to up the ante and create a whole new set of challenges for my self. The photo below represents about six hours worth of work in layout, rough out and finally picking up a gouge. The piece is about 6 3/4” by about 8 1/2”. It is being made from a piece of 2×12 SPF that used to be a leveling block under our TV set in our old ho...
I joined the bases with the stretchers by using dowels as anti rotation pins, and then running a bolt through the stretcher to pull everything up tight… I added a top that is 22" x 12" of double thickness birch plywood. You can see some blade burn on both the plywood and the hard maple bases. It was a sharp blade, but I had feed rate issues. Cutting the top. The excalibur blade guard is a real asset when cutting sheet goods for not only finger protection, but overblade dust...
- My Journey As A Creative Designer - Woodworking and Beyond - 1793 parts
- Extremely Average - 324 parts
- Toy costruction - 116 parts
- A journey into the workshop. - 110 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Daily Update - 87 parts
- Woodworking on a Half-Shoestring - 82 parts
- Life as an Amateur Woodworker - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1819 entries
- dbhost - 436 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- mafe - 313 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 242 entries
- Dave Rutan - 231 entries
- Betsy - 228 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- A Slice of Wood Workshop - 211 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 195 entries