We have just been featured in the October issue of New Mexico Magazine. This two page spread talks about us as artists and how our beautiful surroundings inspire us. It shows off our Shangrila II rocker, a dinning chair and the Hemesphere table. It was very exciting to have this article done on us and it came out better than expected. We had a lot of fun with both the writer and photographer when they came all the way out to our place for this article. The calls and emails are coming in from ...
I am a woodworker, teacher and publisher of woodworking instructional bundles consisting of DVD, book, full-size patterns and on-line support. Build A Maloof Inspired Rocker with Charles Brock has sold to hundreds of fine woodworkers all over the world. My newest project Build A Maloof Inspired Low-Back Dining Chair with Charles Brock will be available soon. When teaching woodworking classes I can quickly tell if a woodworker’s style is that of an artist or an engineer or somewhere i...
Some of the most talented people in the world work in complete anonymity. If they are lucky after death somebody discovers their work and it becomes something of value. A professional should receive re numeration for their work and money too! Ha! How do you make the necessary connections with a qualified customer? What Is Your Brand? For years I was a general furniture maker. I built a large number of beds, tables and cupboards. I was a furniture maker with very little identity in a tow...
I’ve been wanting to build a Maloof style rocker for about as long as I’ve been a woodworker (about 4 years I think)... I always put it off thinking that my skills werent there yet (still think that). I decided I’d wait until my wife and I were expecting our first child, and then I’d take the plunge and build one. Well, here we are. I need to have the chair done by Oct 5 :). So, my other project is going to have to wait (Arts and Crafts Dining Table). I started...
I am a professional woodworker, instructor and publisher. My instructional bundle titled “Build A Maloof Inspired Rocker with Charles Brock” has helped fine woodworkers all over the world to make their rocker a reality.My newest project is Build A Maloof Inspired Low Back Dining Chair with Charles Brock. Part five is my opinion about acquiring the tools of the trade. I hope you enjoy! While teaching a recent woodworking class, I was asked a question in front of the group that ...
Ok, finally after about 8 months of work (in my spare time between full time job and full time school), all of the pieces are done. It was time to assemble and glue up the chair! I started by gluing on the back legs. I used clamping blocks cut at 6 degrees so that the clamps would be square with the faces of the legs which cant out at 6 degrees. Once the front legs were shaped (see Part 5), I attached the adder blocks for the arm transitions. These blocks were cut from the same s...
The back braces were made by cutting thin strips, “lams,” and then laminating them together on a form. Each back brace consists of four lams. The top and bottom lams are Walnut, the same as the rest of the chair. The middle two lams are quarter sawn ash which gives them strength and flexibility. The lams are just shy of 1/8” thick and were cut on the table saw. This operation is generally not something I’d consider doing on the table saw—as its pretty much...
It’s been a long time since I made a blog post. I’ve been taking photos throughout the process, but I havent had a chance to update the blog. So here goes: The last post left off with the seat carved out and sanded to 80 grit. The next step was to shape the curve on the front with my trusty spokeshave (its not that trusty. I’m not good with hand tools, but I’m learning). Hal recommended sanding the seat at this point all the way to 1000 grit (abralon pads)...
My Build A Maloof Inspired Rocker Instructional Bundle has helped fine woodworkers all over the world to build their “Bucket List” rocker. The following is one of my favorite customer feedback stories. It really touched me that a project from Columbus, Georgia could reach around the woodworking world. Part 1 Thomas Friedman’s book “The World is Flat” describes the world’s new reality. The computer and the Internet have made it possible for people to c...
Part 2 of my chair build—based on Hal Taylor’s plans. With the seat glued up, it was time to flatten it, trim it to size, and cut the notches for the back legs. In terms of flattening, I just wanted it flat enough to get square edges when I cut it on the table saw. I didnt need a perfect surface since it was going to be carved out and shaped later. To cut the 3”x3” back leg notches, I clamped the seat to my miter gauge that had a tall sacrificial board ...
- My Journey As A Creative Designer - Woodworking and Beyond - 1808 parts
- Extremely Average - 324 parts
- Toy costruction - 129 parts
- A journey into the workshop. - 114 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Woodworking on a Half-Shoestring - 91 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1833 entries
- dbhost - 441 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- mafe - 321 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 245 entries
- Dave Rutan - 245 entries
- Betsy - 228 entries
- stefang - 221 entries
- A Slice of Wood Workshop - 214 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- bandit571 - 201 entries