First lets start with the work horses. I picked these up at Klingspore. It’s my local woodworking shop but I have also gotten them from the box stores. These are 50 and 80 grit. I will use the 80 on this project. The mahogany should be soft enough for it. I want to do one in purpleheart soon so I picked up the 50. If you haven’t worked with purpleheart, it is one hard wood, but that is a blog for another time. LOL. Here you see that I laid out a simple grid pattern over ...
Recently I had a need to build a new table saw base for my saw. Rather than just building a simple replacement base, I opted to build one with lots of storage potential. This new base measures 6 feet long by 2 feet wide, which gave me good reason to move over to the new shop building. I haven’t yet finished the new shop set up ( haven’t even started) but this build is a great start giving me lots of options for storage potential… This build is a 2 part project. So be sure to...
This project is a fine example of the 80/20 concept. it takes 20% of the project time to complete 80% of it, and then, 80% of the project time to finish the last 20% of the project. As it gets to the details, things take longer to think through, plan out, cut…mill…glue… and finesse. this time it’s the leg vise Chop, and although not completely finished (still need to trim, round off, and apply BLO), it’s construction is done. I was originally planning to us...
The first step in carving out the table legs I began with the side scrolls and front flutes at the bottom of the leg. Before I start carving I always hone or sharpen any knife I will be using that have any small chips in the edge. This will give you a nice clean smooth cut when carving. For the table legs I used Genuine Mahogany it is a great carving wood and I think it has a cleaner cut than basswood because of it’s tight grain. To layout the legs I made a drawing template out of a ...
While waiting for glue to dry I tackled the large drawer that will be faced with the mahogany/maple-stripe front. After the last project where I used dovetails for all the small drawer I wisened up (is that a word?!?) and went with box joint. My box joint jig is based on my Incra 998SE Miter gauge . The 1000SE comes with the flip stop which is very useful with 2 built in stops, and a micro adjustment which I use to sneak up to a perfect box joint fit. For added stability I also use the...
Once the banding segments are organized we can now focus on creating the interior design. We’ll need a few outer rippings that will sandwich the segments together and keep them in alignment. You’ll notice in the picture that the outer hardwoods are walnut and maple glued together. In this case the walnut will be on the inside with the maple on the outside. The reason for this is to create contrasting colors within the banding and also with the mahogany picture frames that will...
Joinery – Spline Miter Joint. Watch and learn how to cut and fit spline miter joints for your woodworking projects. Make a strong and decorative miter joint for furniture, picture, frames, jewlery boxes and much, much more. Read the following woodworking article to learn more about the spline miter joint.http://theapprenticeandthejourneyman.com/tag/spline-miter-joint/ Your comments are welcomed. Watch more woodworking how to projects & videos on YouTube…Subscribe ...
“I have missed more than 9,000 shots in my career. I have lost almost 300 games. On 26 occasions I have been entrusted to take the game winning shot…and missed. I have failed over and over and over again in my life. And that’s precisely why I succeed.” Michael Jordan…(1963 – ) Former professional basketball player, active businessman, and majority owner of the Charlotte Bobcats. Wood inlay has a mystique about it. Some of the finest furniture created by...
Here starts something I always wanted to make. A pie crust table. This picture will give you an idea of what it will look like.. ..Now mine will have a top that looks like this one, but I plan on doing something different for the legs. I will be unique. It’s something that just came to me... Lets start with the top. I had the perfect piece of 6/4 mahogany that I have been saving for this. The problem is that it was a little too short for the diameter top I wanted to make. Here ...
Well, I had a couple more things I wanted to make first, but my wife kind of changed my priorities for me. She started out by commenting on how the new ones looked in the store, and then started with how nice a new one would look in our dining room. I took the hint. So, where to start? Well, I asked her what she wanted and I got, “I don’t know, just make something. I trust you.” Hmm… No restrictions! That’s nice. Now what do I want? Chairs would be th...
- My Journey As A Scroll Saw Pattern Designer - 1183 parts
- Extremely Average - 325 parts
- A journey into the workshop. - 87 parts
- Daily Update - 87 parts
- Just for Fun... - 80 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- As The Lathe Turns - 67 parts
- Workshop Development - 65 parts
- Sheila Landry (scrollgirl) - 1205 entries
- frank - 417 entries
- degoose - 387 entries
- dbhost - 331 entries
- Ecocandle - 326 entries
- MsDebbieP - 299 entries
- Martin Sojka - 297 entries
- Karson - 292 entries
- William - 249 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- mafe - 201 entries
- Todd A. Clippinger - 187 entries
- Chris Davis - 183 entries
- Rustic - 183 entries
- PurpLev - 162 entries
- BritBoxmaker - 159 entries
- shipwright - 159 entries
- scottb - 144 entries