I wanted to share my experiences in making landing nets with you. This is from an article I wrote for the August 2010 edition of On The Fly, the newsletter for the Fly Fishing Club of Orange County. Building the Perfect Landing NetBy Greg Madrigal Like many of you, I started fishing when I was very young, and something about it never let go of me. Growing up with 5 sisters left our family with little to no money most of the time. Work for my father was hard to come by growing u...
Hello again everyone. I had such a great time doing the last blogs, I just had to do another. This as the name states, will be about sculpting a box with a right angle grinder. I have began using this method after seeing Andy’s and Gary’s wonderful, sculptures that we like to call boxes. I saw it and just new it was something I wanted to get good at. Some people look at chip carving or the spirit in the tree, I saw how with just a little grinding on a straight grain board th...
This Week I show you how to make a folding out feed table for your table saw. This design was based after an article and plan found in a 2009 issue of Woodworker’s Journal Magazine. Originally the plan was designed for a Cabinet saw with a Biesemeyer Fence System, so I had to make some slight modifications for my Porter Cable Saw. In this 3 part video series I show you a step by step on building this project as well as talk about the modifications I had to make. The Article and plans ca...
Its that time of year again: HOLIDAY PROJECT TIME! So this year, I decided to make a few little keepsake boxes, thanks to some advice from The Great WOODini. I also took inspiration from a box Nicole keeps on her nightstand and developed a new design that is much more practical for the average woodworker to make. The boxes feature a secret locking pin. Once removed, the lid slides off on a sliding dovetail. And as always with these holiday gift projects, you can modify them by trying diffe...
I’d like to start by saying thanks to all the positive people here on LJ. I posted a video last week, http://lumberjocks.com/davemoorefurniture/blog/14854, and got some very nice responses and a warm welcome. To give a proper thanks to the LJ community and to contribute to the advancement of all our skills and enjoyment, here is another video.This video is on scratch stocks; a simple way to make molding. In combination with the router I show how to design and make a cutter that creat...
Several months ago on another forum, I posted a challenge to build a project entirely with hand tools. After several months went by I finally got around to starting on my own project, a jewelry box, and thought I would post it here as well in case anyone was interested. First step was to try sawing one of the chunks into 7/16 boards for the sides. I had picked up an old Diston rip saw a couple of years ago and now was the time to try it out. I clamped the board in my vice and had at it, b...
Well my shop is now a wreck, my eyes are full of dust and I had a blast. LOL. Lets start with the box and grinder. As you can see I drew in the lines on the handle to match up to the box. In the next pictures you will see the grinding process. I thought long and hard about making a video and decided that there wasn’t really a way for me to do it at this time. Maybe I will revisit the idea in the future. I start at my line and gentle pull into the center. I then go to the n...
After two more surgeries and almost a year, I am getting back to the shop to start woodworking again. Last year I made a “quilted cutting board” and have a few people offer to buy it, but I have no idea what to charge someone for this type of CB. If anybody that sells CB’s could help me I would appreciate it. It is 12×18 x 1-3/8 thk and made from Black Walnut;Sugar Maple;Shedua;Yellowheart;Goncalo Alves;Santos Mahogany;Paduck. It took me two weeks to finish.
I have been working on a project in Cherry and before I finished the desks I decided to try out some of the General Finishes Dye stain but on the scrap test pieces the blotching was driving me nuts. I came to this site and tried all the suggestions until I came across the discussion proclaiming that Charles Neil’s pre stain conditioner was the way to go. Bought some, tried it and still had minor blotching but it works well. Watching his video he said it was a water based PVA enhanced produ...
The one Project Video I get asked the most to make is how to build a crosscut sled for the Tablesaw. Well there are a lot of videos out there on making a Cross cut sled, so this is my take on it. I hope you can take something from this video and use it in your shop
- My Journey As A Creative Designer - Woodworking and Beyond - 1783 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 110 parts
- Toy costruction - 108 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 81 parts
- Woodworking on a Half-Shoestring - 78 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1808 entries
- dbhost - 432 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- mafe - 309 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 237 entries
- Dave Rutan - 228 entries
- Betsy - 228 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- A Slice of Wood Workshop - 204 entries
- Smitty_Cabinetshop - 195 entries