561 days ago
by Marcel T |
9 comments »
Hello fellow Lumber Jocks! I’m starting a little blog series on my work-in-progress DIY lathe. In short, I want to build a lathe to turn a few pens, without spending ~$60 some on specifically pen turning materials and ~$200 on a lathe.
So, I want to try turning. I’ve always considered myself a handyman-esque person, and I had that urge to build! The tipping point was when I found a few blogs such as AfriGadget, StreetUse and Future Perfect. Their owners travel a lot, and they notice ingenu...
Read this entry »
742 days ago
by Dusty |
57 comments »
Fellow Lumberjocks,
I figured I have made about every mistake and several blunders that are possible when it comes to woodworking, remodeling and while practicing other various crafts.
I have pulled off just about ever bone headed mistake any one human being could possibly make.
While writing my current blog series “This Old Mold House” I began thinking that it might be helpful to share some of my experiences in order that others may learn from them and perhaps benefi...
Read this entry »
555 days ago
by Marcel T |
2 comments »
Hey guys! Taking advantage of the long weekend here in Canada, (so this was last weekend) I made a better base for my dremel. I was taking it apart to see why it was squeaking (trapped sawdust) when the idea hit me – drill the existing screw holes all the way through the body, and get a longer screw to hold the dremel together (like the old screws) and hold the dremel to the base. Well, I didn’t have a screw quite that long and thin, but I did have some short screws of the correct diameter. S...
Read this entry »
511 days ago
by PurpLev |
5 comments »
I got a few questions about the zero-clearance inserts I made for my bosch table saw, so I figured I’d post the procedure here as to how I made those.
The basic Idea is to take the factory inserts and use that as a template for the router. but alas, the factory insert is just too thin at some points to be able to follow it with a trim router bit, so to tackle this issue I made an initial template out of 1/2” plywood. This first template took a bit more patience and care so that...
Read this entry »
279 days ago
by Mark A. DeCou |
15 comments »
I’m sort of sad this week. It’s just frustrating to me, what is happening now. In the big sense, and the little Lumberjock sense.
An artist and L-J’er that I greatly admire, Thomas Angle, can’t find anyone to buy his work, and he has shut down his business operation
That sort of just stinks, and should be a huge red flag for any of the rest of us that try to sell our handmade work for a living. He can work leather, and combine it with wood like few have ever d...
Read this entry »
875 days ago
by Lee A. Jesberger |
12 comments »
Some additional photos of the Living room and bar project
Photo one shows the matching arches we did in the foyer.
Photo two shows the custom bar stools the client had made.
Photo three show the hand carved limestone and marble fireplace.
Photo four shows the iron work added to the glass doors.
Lee
Read this entry »
