In this video I finish all the detail work of the cheese board. Using hand planes I get everything flattened. Then using a router table I rounded all the edges over and also cut a radius on all the corners. I wanted a way to hang this and drilled a 1 3/8” hole in the corner of the board. Next was hand forging a cheese slicer that was a learning lesson. I have never created an eye on an object, but think it turned out well. Let me know your thoughts! Don't forget to visit my channel f...
During this Sketchup show I go through a balancing wine bottle holder. This has my most recent measurements that I use and also a link for my actual “How to make a wine bottle holder” video. That video was my first ever on YouTube. Check out the Sketchup video HERE.
Don’t waste your money buying a marking gauge. Make your own gauge and use up some of those scraps in the shop. Please subscribe to my channel and share my videos. Click here to view video (videos still aren’t embedding).
I decided to make a card scraper out of a thinner material using a handsaw from a yard sale for $1. I can tell a big difference in the flex from the handsaw blade and the table saw blade. I’ll be using both for a bit and seeing which one I like better. Click here for the video on YouTube. And please subscribe. Edit: I can’t embed video on here at the moment, I will keep trying.
THROW YOUR SANDPAPER AWAY!!! Ok, so don’t throw your sandpaper away, but cut down on the amount of dust in your shop by making this quick and easy tool. A card scraper is also very useful when working around knots in wood. In this video I show you how to take an old, out of service saw blade and turn it into something useful again. Thanks for viewing, comments welcome, and as always, please subscribe to my Youtube Channel.
Create this shop tool in just a couple hours. Can be used as trammel points or throw a pencil in the hole and make it a compass. Create curves, circles, measurements, make it a story stick. The possibilities are endless.
Wall space is a premium in my shop because of the multiple uses of the space. When I started thinking about making clamps I knew I would need a place to store them. I devised a way to put a clamp rack in front of my scrap stick area and hinge it so that it could be pulled up to the ceiling when I didn’t need to access my longer clamps. It’s raised with two pullies with the rope held taught with an old window sash weight. A clip hooks onto a screw eye at the bottom of the rack...
Hey Everyone, Noticed a few people sharing their new website creations to showcase their woodworking skills and accomplishments. I just got mine set up two weeks ago and would love some feedback too! Still trying to fix a few viewing errors that seem to occur on different web browsers. www.woodsimplymade.com Thanks for your time and opinions!! Mike
I must apologize for my lack of interaction here on LumberJocks. I am on the night shift at the paper mill and my neighbors don’t dig the 2:30 am woodworking bit, so I have been limited to my keychain work and ya’ll have seen that. It is my night off and I remembered a couple requests a while back to do a blog on my keychain process. So, here ‘tis! I hope the video comes out right. I’ve been experimenting with my CoolPix. Short videos? I can do that! So I decided to...
I keep seeing these posts pop up more often than not about the scribed line for dovetails, should you leave them on? should you scrap/sand them off? Some say it tells the joint was hand made, Others rightfully so say that the piece itself tells that it was hand made…. Should you make them with a scriber? Or a pencil? A pencil line is easier to remove, but harder to line up to as you are relying on eye sight, Whereas a scribed line with a knife is a no brainer since you just rest your...
- My Journey As A Creative Designer - Woodworking and Beyond - 1831 parts
- Extremely Average - 324 parts
- Toy costruction - 131 parts
- A journey into the workshop. - 115 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Woodworking on a Half-Shoestring - 91 parts
- Shop stuff - 89 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 82 parts
- Sheila Landry (scrollgirl) - 1856 entries
- dbhost - 455 entries
- frank - 417 entries
- degoose - 398 entries
- Ecocandle - 325 entries
- mafe - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- Dave Rutan - 277 entries
- robscastle - 266 entries
- shipwright - 259 entries
- William - 258 entries
- A Slice of Wood Workshop - 240 entries
- bandit571 - 237 entries
- Betsy - 228 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries