I have not made an instrument for a while, and some would say I have not built one this time either… My son has done a video demontrating the tuning, setup and playing of a strumstick. Squaring up the strumstick blanks On another WW Forum a while ago there was a post about building a Dulcitar or sometimes called strumstick. I said it would be cool to make a few of these for some fun. Not too much work, but a chance to hone the luthier skills for a change. I read the plans ...
When I last left you, we were right at the point of beginning construction on many of the jigs and forms that will make this endeavor much easier. Conveniently, the timing works very well since I’m still awaiting the opportunity to make it down to Austin to pick up that Performax 22/44 that I got off eBay (thanks to my cousin, Brady, for getting it for me). This, of course, will allow me to get all that beautiful wood down to thickness easily and more precisely. In the meantime, t...
Making a violin....maybe #1: The begining. A hair brained idea at attempting something kinda crrazy.
Violin construction has always intrigued me and I got a bug in my bonnet about 10 years ago to make a violin. No, I haven’t actually made one yet. Just a lot of false starts. I have carved a couple of tops and backs. first top I made I modelled (unwittingly) from a 3/4 size violin, I carved a back out of maple. I’d read somewhere that’s what the backs and ‘ribs’ the sides are made of. Turns out they are made of soft maple and I used hard maple. I made myse...
Hello. It has been a while since I last had a project build on this site, but I think my next build will make up for the silence. I am currently planning and ordering hardware for an electric banjo. A few months back I started playing the banjo and have really been enjoying it. I have also wanted to make a musical instrument for some time now. After jamming with some folks on my banjo playing along to pop, rock and folk music I thought an electric banjo might make a nice fit. So I began...
After three months of once-a-week woodworking, my Les Paul Jr. project is finally starting to look like a guitar. I spent the first hour of my class installing frets on the guitar’s neck, a process that involves fretwire, a fretting hammer, a few clamps, flush-trimming pliers, some CA glue and a file. The basic process is to cut the fretwire — which had been radiused to 10 inches — for each fret, leaving an extra quarter- to half-inch on either side. Cutting the fretwire Next, I c...
This is a Wood Whisperer first: a series featuring an aspiring luthier, Rick Urschel. Rick takes us through the process of building a classic guitar from a kit available at LMII.com. This is Rick’s first attempt at a guitar, and as such, I am not presenting this as a “how-to”. Instead, this is just one man’s experience as he works his butt off making a beautiful guitar for his wife. I think you are really going to enjoy it. A special thanks to Rick for allowing me to “Whisperize” his content!
Download Low Res .mp4Download HD .mp4Download HD .wmv Rick continues on his journey into the world of guitar-building. He takes us through adding kerfing, inlaying the tail wedge, installation of the binding, and construction of the back, the soundboard, the fretboard, and the bridge. We’ll also see how Rick handles a few errors he made along the way. One error is so big, the fate of the entire project hangs in the balance! Music provided by MusicAlley.com: Jack Jezzro
Taking a stab at building an electric Bass Guitar with a neck through design and laminated top. I will post photos and details as the project moves along.
I was 22 years old in 1976. I was in college to get a teaching degree and at the same time also attending the Maine school of Guitar making (luthiery). For the next few years I made guitars and sold them to college students. I finished about 20 of them. When I graduated from college I had to live out of state and after two years of that got married. Work and family took me away from the smell of brazilian rosewood and sitka spruce. Move ahead to 2008. I’m back in Maine at the old fam...
I’ve been making a few boxes lately and have at least one more to go. I saw this technique for fine tuning the bottom or top edges of a box on a YouTube video about guitar making. In the video the luthier had a large sheet of sandpaper glued to a piece of plywood. After creating the sides of the guitar body, he would rub the edges of the body (sans bottom or top) on the sandpaper to even out the edges completely. Since my joinery is far from perfect, I’ve been using this m...
- My Journey As A Creative Designer - Woodworking and Beyond - 1728 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 98 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Life as an Amateur Woodworker - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1753 entries
- frank - 417 entries
- dbhost - 410 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 301 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 237 entries
- Betsy - 228 entries
- stefang - 213 entries
- Stevinmarin - 212 entries
- robscastle - 207 entries
- Todd A. Clippinger - 207 entries
- Dave Rutan - 206 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 193 entries
- Rustic - 190 entries