439 days ago
by Dorje |
19 comments »
I’m posting these pictures as a means to get bloggin’…and, because I’m interested in milling and drying lumber (on a scale that I can accommodate – in the backyard). I’m also brand new at it, so it’s just fun to share! I would have liked to have photos or video of this ‘small time’ sawing in the backyard, but wasn’t quite there yet!
Inspired by Bob’s forum topic post the other day on the craigslist cherry crotchwood, I took some pics of some crotchwood I cut in April…
A couple p...
Read this entry »
284 days ago
by Dorje |
24 comments »
Here’s a little more ‘milling around’ for fun:........
This board turned out to have some really interesting spalting…........
And, upon closer examination:...........
One with our stacks:........
And our final parting shot! ........
This concludes the milling process. What a blessing it was to have Mike’s support in this process. I can thank LJ for that! And a HUGE thanks to Mike directly! That was a lot of fun last Wednesday. Just amazing what can come f...
Read this entry »
423 days ago
by Lee A. Jesberger |
24 comments »
When designing the shop I tried to anticipate the type of work we would be doing. Looking back, I wasn’t even close.
However, in spite of that, the work flow is very much the same for many woodworking projects. Our shop is laid out considering that work flow.
Our entrance door is where we unload both sheet goods and solid lumber. We stack the lumber on stickers, prior to use, and the plywood is placed on a drywall cart.
We place lumber on the chop saw station, which ...
Read this entry »
289 days ago
by Dorje |
15 comments »
On the same cold, crisp, gorgeous day in Sunny Seattle…the next thing we did was mount a 2×12x12 to the top of the 1st half of the maple log as a guide board to establish our first flat face from which we could continue to cut with just the chainsaw mill. The 2×12 had 2×2 runners screwed on to it to keep it flat and a wee bit more ridgid. One hooked over the edge, while the other was inset a few inches to “shim” the board to “level” it out (all ...
Read this entry »
288 days ago
by Dorje |
23 comments »
After the slabbing cut, we continued to cut the first half of the log. Here’s a short video of Mike on the saw…....
....
After a few cuts we hit a nail…pulled the saw out and cut from the other end…chipped a tooth but nothing really terrible; the chain was still relatively sharp, so we continued to cut!............
Here’s the spalting a bit closer up…it gets even better in the 2nd half!.......
....
A bookmatch shot for fun…........
MORE TO COME!....
Read this entry »
286 days ago
by Dorje |
15 comments »
At the end of this short video you’ll see me look up at Mike. If you listen closely you can hear the saw hit some more metal…....
....
At some point after the next few cuts we hit our 3rd and 4th nails within the same board:........
But, look what we have here!........
Here’s a shot of the “scene” at this point (there’s a few board feet of sawdust):........
We’ll finish up the sawing in the next installment…We uncovered a real gem just a bit ...
Read this entry »
503 days ago
by scottb |
17 comments »
One of my first ideas for this challenge was to make a “green” table – as in recycled, not painted. After weeks of pondering, and ultimately ignoring the problem of where to begin, and more importantly, what to use, I remembered that I had this door sitting in my shed.
It may have been original to the house, but has been collecting dust for the past 5 or so years since we bought the house and replaced the exterior doors – this one had dog door cut out of it and was ...
Read this entry »
277 days ago
by Dorje |
21 comments »
Last step in the process (well not the last – but close to it – still have to get back over there and paint, or otherwise seal the endgrain, which hasn’t done much in the way of checking with all the freezing temps and the moisture we’ve been getting)
...I set up a level ‘foundation’ for the lumber stack. Made sure it was up off the ground and spaced the beams just under 2ft apart:.........Here’s a couple shots of the progress. My wife helped me h...
Read this entry »
319 days ago
by Dorje |
22 comments »
Well, just some text at this point – but I can’t slow my heart rate down at the thought of what’s happening next door. A major maple – which looks like it may have some serious figure – is coming down. I’ve been offered the bole (the main trunk from the base to the crotch), which is about 10-12 feet long, and a couple sections of major limbs from the crotch up a ways. The arborist says he’ll need to cut the bole in two…I’d like it left ...
Read this entry »
316 days ago
by Dorje |
18 comments »
The remainder of the maple came down today and I got a shot of the main trunk section that I plan to mill. It’s definitely going to be spalted throughout. This bole is 35-40” in diameter and the arborist was able to leave it intact from base to crotch! It’s 11’ long. It’s partially cracked on the side you can’t see and does have some splitting, so it probably won’t yield wide boards. I think it is sound enough to go through with this venture. Th...
Read this entry »
1 2 3
29 entries
