I routed in grooves on the fence of my new resawing jig for screwing logs to it, and with that, it was ready for action: Here’s a video – shot on yesterday’s lunch break, edited together last night, with the jig I made on Sunday – of my very first resawing work. The Timberwolf blade works very well, with no resistance and a clean cut. The Craftsman 18” wood/metal bandsaw is a slightly different story. It’s wobbly, which is just a ‘feature&#...
I’ve done some smaller things in Jacaranda lately, but what does the larger stuff look like inside? I wanted to do some larger bowl work and other things, so I went to one my larger limbs and cut it into some pieces. They’re simple, but pretty inside, so I thought I’d share. It’s not very common a wood for most woodworkers, I think. The piece is the large one front and center on top of the pile seen here (and blogged about here): Here’s me sawing it up ...
Well, I promised pictures last time, and I have some..I started on the spring pole lathe, which is my big project for this summer/fall, and I decided after much goings on to not make a treadle lathe, meaning in this case continuous motion, but a traditional spring pole lathe, where the piece rotates once or more (hopefully many more) times, then back again. Why? I was inspired by a couple things, like poverty and such, but also after doing months of research into it, it’s just what appe...
This past Sunday I decided to saw a Y-shaped Ficus log in half and get some bowl blanks out of it. I couldn’t fit the 14” section under my band saw’s 12” vertical clearance, so I just cut the first half, up to the Y split. Then I spent about 20-30 minutes sawing through the Y with my 24” carpenter saw. Good workout! I could fit a 10-7/8” circle on each log in the Y area, which I wanted to try turning for the twists in grain and color. I had to...
This past Wednesday, all in the span of an hour lunch break, I ran home, cut a chunk off the end of one of the Jacaranda logs from my recent haul, resealed the main log with Anchorseal and washed out the brush. Sliced the chunk in half through the pith, and turned one into a thin-walled, simple bowl, took a quick shower, and brought the resultant piece back to show off at work. Amazing what can happen in one hour! The turning itself took less than 15 minutes! I’m getting faster, if not ...
Hey rustic makers. I piddle around with natural sticks once in awhile, but have never spent the money to invest much in the tools that would speed up this work. I have agreed to help pro-bono with the Vacation Bible School set work at our church for this upcoming June, the week of the 10th. So, time is getting short. This sketch is my vision of what I am to do. I will be making the rustic fencing and gate for the kids, and a frame for the backdrop painting. I have located the logs, ...
I have always cut my green logs either on the ground or on top of other logs. Well a few weeks ago I was cutting a log and it decided it wanted to dance a little bit. Now I don’t care if a log dances or not I just don’t want it to move while I have a moving 20” chainsaw in it. This got me thinking there has to be a way to hold the work safely for cutting. So I took to the internet looking for sawhorses for chainsaws. I did find a few commercial units but they were all listed in E...
I got 2 1” Timberwolf blades from Suffolk Machinery Corp. – 2TPI and 3TI – several months ago, and have been dying to try them out ever since. In that time I had several more projects, mom’s 10-day long yearly visit, my best friends’ wedding, a project I built for that (that I should post one of these days), and so much else. I didn’t want to use them until I had a resawing jig ready to go, so realizing that time was now, I jumped on it yesterday, later in ...
...in the southern hemisphere. The days are getting longer, the temperatures warmer, the leaves are out again and the rhodos are blooming. That means more shop time (I’ve got an unheated garage for a workshop) and more projects – I’ve got a slew in the pipeline: some pressies in the form of some small food storage containers, one of those Wood Whisperer’s boards is glued up and ready for phase 2 cutting and I’ve got a custom TV stand for a friend nearly ready fo...
Ancientwood, Ltd. has been selected to supply a 7 foot Ancient Kauri table for ABC’s Extreme Makeover: Home Edition! This event is taking place in South Range, Wisconsin, August 3-10. Ancientwood is very excited to have this inspiring opportunity and are pleased to be able to contribute to this deserving family.
©2005-2008 LumberJocks.com. All Rights Reserved.
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
| Latest Projects | Latest Blog Entries | Latest Forum Topics 
|
Latest Projects | Latest Blog Entries | Latest Forum Topics 
|
