I wanted to share these photos to encourage everyone to get your children, grandchildren, nieces, nephews, and young friends involved in your work. My son is 18 months old and wants so badly to imitate everything we do. I put in the smallest blade we had and I let him help me scroll saw. My 3 1/2 year old daughter took to the scroll saw like a natural. (Must be genetics) She has spent most of her weekends in the garage with my father and I for glue ups and such and she is no stran...
The last steps to complete our plate is to apply a finish.The finishing process gives many carvers headaches and can lead to much frustration.With this in mind, I’ve created a series of finishing lessons in the My Chip Carving Video Vault.I won’t create a full-blown finishing video for this class but instead will encourage you to check out the finishing series already created. Here are the steps to finish your plate. 1. Remove all leftover pattern lines. The following video ...
Here’s our next lesson on how to carve the border for our 10” plate. Take your time and enjoy the lesson and your carving! Don’t be afraid to ask any questions when they come up. !!
The pattern is on your plate and your knife is sharp. That means it’s time to start carving!We’ll begin with the rosette. Have one or two practice boards ready so you can try some of these chips on your practice board before carving on your plate. Here’s the lesson: Next lesson: Carving the border
Since I was asked by a TON of people over the last few months how I go about creating a scroll saw pattern from a picture I am going to attempt to share with you all just how I go about doing so. First of all, I am using Adobe Photoshop 7.0.1. I was able to get a great deal on the software (student pricing) and that is what I use for 95% of my graphic’s work. The techniques I use can pretty easily be duplicated using other graphics programs, some of them extremely inexpensive or even fre...
Online Scroll Saw Class - Incredibly Fun Adventures in Scroll Sawing #6: Cutting Sharp (Acute) Outside Corners
By now most of you should have a bit of a feel for cutting some nice outside curves on the scroll saw. As we know however, most designs also consist of some nice sharp angles. Making accurate corners can be a bit of a challenge when you are new to scroll sawing, but with a few quick tips and a little bit of practice, you will find it is not as difficult as you may have imagined. Before long you will be scrolling those angles with little effort or thought. In order for me to show you some...
Now that we have had a chance to practice casting on and off, we are going to practice a bit more on cutting outside curves. Cutting curves is probably one of the easiest things to do on a scroll saw. Most designs consist mainly of curved lines, with occasional straight runs from time to time. Once you get used to cutting curves and turning corners accurately, you are well on your way to being a great scroller. One thing that is important to remember is that the blade is stationary a...
Today Harbor Freight had a 25% off coupon. I used mine to buy a mini wood lathe. My best friend was with me and he bought a set of chisels for me as my birthday gift. I’m so excited, and already very covered in saw dust and wood shavings. Naturally, I tried to just jump in, I mean I’ve used my itty bitty Dremmel lathe before. I made a HUGE mess of a scrap of 2×4. Then I came inside at my friend’s urging, watched a few Jet videos on YouTube, and went back out to the g...
Just in case you missed this earlier post, below is where to send your completed square(s). I’d like to have these in hand by the end of April. If you can’t quite finish by then, let me know and I’ll save a spot for your square(s) on a quilt. Send your square(s) to meI will be assembling the square(s) you send me into a chip carved quilt(s). Each quilt will be auctioned or sold with proceeds going to the My Chip Carving Foundation. I will post a blog entry showing you ...
Looking at the stats, it’s been 356 days. and a whole lot more of a woodworking since day 1. The passion is still going strong, but the shared experiences and information that has flown around has added so many new abilities and capabilities. I want to thank everyone that ever responded to any of my questions in person, or indirectly by asking questions on the forums, that I had in my mind as well, or answered those. there are many opinions between the 10K members, some share the ...
- My Journey As A Scroll Saw Pattern Designer - 1189 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 87 parts
- Daily Update - 87 parts
- Just for Fun... - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- As The Lathe Turns - 67 parts
- Workshop Development - 65 parts
- Sheila Landry (scrollgirl) - 1211 entries
- frank - 417 entries
- degoose - 388 entries
- dbhost - 331 entries
- Ecocandle - 325 entries
- MsDebbieP - 300 entries
- Martin Sojka - 297 entries
- Karson - 293 entries
- William - 249 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- mafe - 206 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 187 entries
- Chris Davis - 183 entries
- Rustic - 183 entries
- PurpLev - 162 entries
- shipwright - 160 entries
- BritBoxmaker - 159 entries
- stefang - 145 entries