If you are in or near NE Ohio, come out of the virtual world and join us! We are a Woodworking MeetUp Group that is dedicated to promoting the Art of woodworking… by teaching and learning from other members. Search for Woodworking Groups on MeetUp.com… and see what we do. https://www.meetup.com/NE-Ohio-Woodworking-Meetup/ We are having a Post-Holiday Party in January… if you are interested in Socializing with Fellow Woodworkers. Details on the MeetUp site
I posted a picture of a Craftsman Style Frame i made and i thought if anyone was interested, i have a two part video series of how i did it. The main jointery is the use of a half lap. It’s a simple and yet strong joint. I decided to show how to make it using both power tools and hand tools. Hope you enjoy it.chad stanton
So a few weeks ago i posted a picture of the cabinet I made for American Woodworker Magazine. Well finally I’ve got the video done. Hope you enjoy it.
Since I did a video how to fit inset doors, I thought maybe I should take a step backwards and show how to make a simple cope and stick cabinet door. Hope you enjoy the video, especially the ending.:-)
If you’ve ever struggled with setting inset doors, I have an easy method for you.
BEFORE I START, IF YOU READ THIS, AND CAN OFFER ADVICE, I’D LOVE TO HEAR IT. THANKS IN ADVANCE!!!!! Ok, after collecting information from a couple key people, and looking carefully at my pieces, I’ve moved on to Sample #2. First things first. NEW CLAMPS!!!!! Not the best, but all I could get for now. On to business. More blanks, 10 this time. For these, I used a sanding block and norton 3x sandpaper. This was slow, but quiet as it was about 9:00PM when I started, and I’...
BEFORE I START, IF YOU READ THIS, AND CAN OFFER ADVICE ON IMPROVING THIS WITHOUT BUYING ANYTHING OVER $25, I’D LOVE TO HEAR YOUR ADVICE. THANKS IN ADVANCE!!!!! I bought some clearance pen blanks from Rockler (Pau Ferro, Indian Rosewood, and Cherry, I think). Not having any “larger” tools or super-fine precision tools (band saw, table saw, router table, etc.) I decided I would begin the adventure the “backwoods” way. I Started by laying them together, checki...
• My marquetry guidelines: There’s nothing to it,... really just get a nice and strait ruler, a sharp normal utility-knife, scotch-tape , patience and a small hard sandingblock with 150 and 180 grain and start cutting, thats how I learned it….. Guidelines: - I generally use MDF as a work-surface because it has no grain and therefore the knife won’t try to ‘wonder off’. - Never try to cut the veneer in one go, always make multiple lite strokes dependin...
- My Journey As A Creative Designer - Woodworking and Beyond - 1828 parts
- Extremely Average - 324 parts
- Toy costruction - 131 parts
- A journey into the workshop. - 115 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Woodworking on a Half-Shoestring - 91 parts
- Daily Update - 87 parts
- Shop stuff - 85 parts
- Life as an Amateur Woodworker - 82 parts
- Sheila Landry (scrollgirl) - 1853 entries
- dbhost - 452 entries
- frank - 417 entries
- degoose - 398 entries
- Ecocandle - 325 entries
- mafe - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- Dave Rutan - 276 entries
- robscastle - 263 entries
- William - 258 entries
- shipwright - 258 entries
- A Slice of Wood Workshop - 233 entries
- bandit571 - 229 entries
- Betsy - 228 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries