In this blog I’ll show to you the process of making Greene and Greene ceiling lamp. 1. To cut workpieces 2.Joint with biscuits 3. Glue workpieces4.Makiing patterns 5. Routing workpieces with patterns 6. Making mortises for the hinges 7.Routing bases components 8.Gluing base 9.This is device for the routing joints of the covers component 10. Assembly 11. Staine and finish 12. Assembly lamp with stain glass and fixtures
This is a precis of what happened over about a 2 week period… A while ago I came up with what I thought was an interesting design for a lamp base.I was in Lisbon a few weeks ago, and ran across some hand-made paper.Ah ha – fate!I did some sketches, messed about with some bits of wood, did some drawings, and set to.For some reason best known to someone else, I decided to start with the top bit first.It being based on interlocking struts, I prepared some oak strips, cut them to l...
The original link to this podcast was lost, it has since been re-established… I’ve had several questions about this lamp; in this podcast I show how the shade is assembled. Frank Lloyd Wright Inspired Lamp - Assembling the Lampshade
Once upon a time, long ago and far away, I wanted to be an architect. (Of course the fact that I couldn’t draw sort of doomed that career path.) One of the architects who inspired me the most at that time was Frank Lloyd Wright. Perhaps the most widely known and recognized building designed by Frank Lloyd Wright was a home named Falling Waters. Not only did he design the home he designed the furnishings. One of the items he designed for the home was a bedroom lamp. Fellow LJ Randy...
This shadow casting lamp creates a cool effect to any room by casting a shadow on a wall of any scene you’d like to create in the lamps silhouette panels. For this project I used horses. The front of the lamp shows a horse in a natural calm state on all 4’s . And the frosted front panel of glass gives a nice subtle tone of light to illuminate the room. The back of the lamp has a silhouette of a horse raring on it’s hind legs. This is the side that casts a shadow on...
At the urging of my girlfriend, I fumed a small scrap of QSWO and then went over it with amber shellac and dark brown wax, buffing it out with 0000 steel wool. It’s pretty magnificent. As a result, I decided to give my Limbert table an “authentic” Stickley finish. While waiting for the glue to cook, I fashioned what can only be described as an impromptu fuming tent. Even one of my neighbors came over to see what monstrosity I was building, as they’re usually ...
Quick update after such a long (long) break from this project. As previously blogged elsewhere, the lamp will indeed be made from a single piece of lilac with the lower portion divided into three legs straddling a stone. Took months of on-and-off pondering, and some brainstorming, but now, having worked out the next few challenging steps, I can put the “lamp back on!” Today I took my Dremel to the cracks and splits on one end (after finally deciding which end was up) and...
Been so caught up in my boxmaking, I figured I’d better get this box built, so I can go onto the next step when I”m ready… This will be the “steam chamber” to let me stretch the legs a bit. Just needs the doors, a rack, and some steam (lots of steam).
Yesterday, I milled up four long, rough boards to 3/4”. The Robert Lang book uses thicker stock, but I had to get rid of the saw marks. I chopped them up a bit oversized to give me some leeway during the glue up. I arranged the boards for defects and grain to give me the best four sides out. I glued up one panel every two hours last night during dinner and a movie. This morning they’re all ready for the band saw. One thing I’ve noticed is that there seems to be a lot o...
- My Journey As A Scroll Saw Pattern Designer - 1042 parts
- Extremely Average - 325 parts
- Daily Update - 87 parts
- A journey into the workshop. - 85 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Just for Fun... - 72 parts
- The Craftsman's Path - 67 parts
- Workshop Development - 64 parts
- 52 Weeks - 52 parts
- Sheila Landry (scrollgirl) - 1064 entries
- frank - 417 entries
- degoose - 384 entries
- Ecocandle - 326 entries
- dbhost - 318 entries
- Martin Sojka - 294 entries
- Karson - 288 entries
- MsDebbieP - 283 entries
- Betsy - 221 entries
- William - 213 entries
- Gary Fixler - 204 entries
- Stevinmarin - 198 entries
- mafe - 188 entries
- Chris Davis - 183 entries
- Todd A. Clippinger - 182 entries
- Rustic - 182 entries
- PurpLev - 159 entries
- BritBoxmaker - 146 entries
- scottb - 144 entries
- kosta - 144 entries