This article comes partway through the project. I’ve completed the shaping on the base, and picked my pieces for the neck of the lamp. I’m doing some inlays for the sides of the neck, Orange Osage into the Walnut.I made the cuts on the table saw with a crosscut sled and a scrap piece of 2×4 braced against the sled fence to hold it in place. Card Scrapers made short work of any spots that were too wide as I tested the inlays above.Glue up was interesting, the thin end of th...
Timber4fun here on LumberJocks has built a beautiful Arts & Crafts era lamp that I just fell in love with.So not to copy but try something a little different I will use his style but put a computer in it.http://lumberjocks.com/projects/93681 I scrounged 6 oak drawer fronts 6”x14”and this will be the main building blocks for this build.Just to wet your apatite here’s where I’m at right now with one of Timber4funs pictures that I went by. I had been thinking ab...
Spring has finally arrived here in Nova Scotia! After the long, harsh winter, even me – one who loves winter – was ready for a change. The days are getting longer and the air is warmer and the last remnants of snow piles are slowly disappearing. I often find that the change of season encourages me to do some work around the house. Even though I was in the midst of my Haunted Carousel project, as well as several other things that I have on the go, on Saturday I opened up and l...
This blog post is about the first step of my first project about designing and making a cubic container which represents our personality and how we want to be perceived. please click the link to read http://joshhallfurniture.weebly.com/1/post/2013/10/cubic-container-project.html many thanks Josh Hall
My youngest a while back accidentally knocked a lamp of the table and the ceramic lamp broke of course leaving me with just some hardware. I remake a wood lamp around the surviving hardware. Please watch and tell me what you think of the results. Thanks!
In this blog I’ll show to you the process of making Greene and Greene ceiling lamp. 1. To cut workpieces 2.Joint with biscuits 3. Glue workpieces4.Makiing patterns 5. Routing workpieces with patterns 6. Making mortises for the hinges 7.Routing bases components 8.Gluing base 9.This is device for the routing joints of the covers component 10. Assembly 11. Staine and finish 12. Assembly lamp with stain glass and fixtures
Some of you who read a lot of my ramblings know that I mostly work with cottonwood, pecan, oak, and mahogany (sapelle actually). The reason for that is that it’s what I have available. So I do what most woodworkers do. I work with what I have. It do not have the funds to seek out more exotic woods.Well, over the course of the last year or so, I have recieved several other species of woods from friends, mostly fellow Lumberjocks. I have been hoarding this wood because, truthfully, I̵...
This shadow casting lamp creates a cool effect to any room by casting a shadow on a wall of any scene you’d like to create in the lamps silhouette panels. For this project I used horses. The front of the lamp shows a horse in a natural calm state on all 4’s . And the frosted front panel of glass gives a nice subtle tone of light to illuminate the room. The back of the lamp has a silhouette of a horse raring on it’s hind legs. This is the side that casts a shadow on...
I am a co-chair for the Members Gallery at this year’s Furniture Society Conference. All Furniture Society members are invited to submit to the Members Gallery. Design, Community & Sublime Conference will be held at Maine College of Art from June 14-16,2012 in Portland Maine. The exhibition is a wonderful opportunity to show one’s work to your peers and other conference attendees. We encourage all Society members to participate. There is no fee to submit to Members Galle...
So around here there are numerous old stumps that look old and weathered, had one on the corner of my property so I cut it up for turning stock. It was very pitchy and sticky and def. not ideal wood for much. but after making a small dish from a nice swirly root clump I noticed the fine intricate grain and subtle orange translucence. So I made several small lampshade prototypes. Pitch bled out of the wood with warmer bulbs obviously. But I am about to start a kickstarter.com project involv...
- My Journey As A Creative Designer - Woodworking and Beyond - 1793 parts
- Extremely Average - 324 parts
- Toy costruction - 115 parts
- A journey into the workshop. - 110 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Daily Update - 87 parts
- Woodworking on a Half-Shoestring - 82 parts
- Life as an Amateur Woodworker - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1818 entries
- dbhost - 436 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- mafe - 313 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 241 entries
- Dave Rutan - 231 entries
- Betsy - 228 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- A Slice of Wood Workshop - 210 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 195 entries