I just added a follow-up video of my review of the Laguna 2 HP Mobile Cyclone Dust Collector. In the video I discuss how Laguna delivered a new pre-assembled replacement dust collector, and show what was fixed and what wasn’t.
I recently joined the ranks of woodworkers that use a dust collector. In my case I purchased a 2 HP mobile cyclone unit from Laguna Tools. The following two videos show my experience purchasing, setting up, and using the dust collector. Although I’ll be keeping the dust collector for reasons explained in the video, in the end I wish that I had bought a competing product from another company. In this second part of my review I wrap up some of the frustrations that I’ve expe...
I recently purchased a 16” jointer planer combo and 18” 3000 Series Bandsaw from Laguna Tools. It has turned into my worst nightmare. I have spent $6,245.83 on this order. It arrived damaged and I properly noted it on the freight bill. I contacted laguna about the most obvious damage to the band saw. The upper flywheel had come apart in shipping. I rebuilt it and it seems to work fine now. My nightmare starts really with the jointer. In short this machine should edge join using...
Changing Blades with a Laguna Tools Drift Master Fence #2: Changing Blades with a Laguna Tools Drift Master Fence
(To continue from my last post #1). I see from the comments of my first post many of you have run into this problem of getting the doors open when changing blades. So after much research and trying every thing here are the best methods I have come up with. The first way, which many of you probably know from talking to a Laguna Rep is to tilt the table. That will allow you to get the bottom door past the fence so you can get it open to change your blades out. The Second way, which is my ...
Changing Blades with a Laguna Tools Drift Master Fence #1: Changing Blades with a Laguna Tools Drift Master Fence
After many years of seeing this fence on the Lagunatools website I finally bit the bullet and bought it. When it first came out I spoke with one of the sales guys about it and I was going to have to drill my table to mount it so I held off. About a year later they finally came out with the universal mounting brackets for the fence so I could bolt it right on to my machine and that is exactly what I did. After cutting down alot of curly maple with my resaw king blade it became dull and it w...
- My Journey As A Scroll Saw Pattern Designer - 1545 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 95 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1570 entries
- frank - 417 entries
- degoose - 394 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 271 entries
- William - 258 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- shipwright - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 188 entries
- Rustic - 186 entries
- Chris Davis - 183 entries
- BritBoxmaker - 181 entries
- Smitty_Cabinetshop - 170 entries