If you are just surfing through the internet about Walking Canes and found this posting, and you want to see some actual canes I’ve carved, click on the Widget Picture of the cane here. That project has more than 40 other links to other unique carved walking canes I’ve built. This blog entry is for showing a new concept sketch of a carved walking cane design that I am working on so that the prospective customer can view the concept drawings and provide his input, or approval. ...
Applying a finish to your completed chip carving is a “make or break” step. Do it well and your chip carving comes to life and is something wonderful to behold. Do it poorly and your carving loses the beauty and the finish detracts from the chip carved design. Follow this lesson closely from start to finish and you’ll find success with each chip carving you complete from here on out. I call this the My Chip Carving Quick & Easy Finish Step 1 – Remove leftover...
Here is how I finished the bookshelf in our now demolished spray booth.Hope you get a few pointers/tips from this and perhaps you have some advice for me.
I got it built and ready for the finish. The customer requested that we do a two tone color. They really want it exactly like the saw on our web site (see example). I tweaked the colors a little bit but for the most part it is standard Minwax colors (see color chart). I used Red Chestnut and Golden Pecan. When using stain you can not tape off. There is not way to get a crisp line. You’ll always have some bleeding. I just had to stain parts as separate pieces and assemble them ...
People often ask me about my finishes and I am always wondering about how others do their finish too. I feel the finish is the key to any furniture. A bad finish can destroy the look and the value of a piece. I thought I’d share what I do and what material and equipment I use. As in equipment, I use an air assisted airless. It takes the best of both worlds. Low air volume but without using too high of pressure as in the airless rigs. It works like an airless, which I used for ...
In my opinion this is the best and easiest way to finish pine projects. This isn’t the greatest demonstration but hopefully I was able to show how easy it is to finish pine. The product I am using is Zinzer’s Amber Shellac. I suppose you could get similar results using a shellac compatible tint or dye for brown tones but I have not tried. I have never messed up a project using this method. The video is a little on the long side so I do apologize. I would love to hear any comments,...
https://s3.amazonaws.com/lumberjocks.com/ldcxy83.jpg https://s3.amazonaws.com/lumberjocks.com/ldcxwt7.jpg1. You will use much less material because the transfer efficiency is higher. 2. Less noxious overspray.3. Better finish with no orange peel. Actually it is glass smooth, and seems almost automatic to get perfect results. 4. If you accidentally run the cup out of finish, it just quietly stops spraying. Compare this to the sputtering mess created by a siphon gun. 5. Two coats...
Sorry for the False Start Guys… I had the privacy setting turned on when I posted to YouTube. (D’oh!) It’s Finally Here! Whew! It takes a lot of work to shoot a video, edit, and get it posted to the internet. I am still struggling with posting to the internet. My HD file sizes are too big to be accepted by BlipTv and YouTube, and once I get the size down to an acceptable limit, they lose quite a bit of quality. This is a bit frustrating and makes me sad to see al...
A friend of mine has a cabinet shop with a spray booth and was nice enough to let me play in it. These photos were all taken in his shop. Here is one of the samples we tried on a test piece. This is aniline die dissolved in alcohol. WOW, I really like the color! We used his Festool sander for the final sanding. I had to stir the dye for over an hour. On goes the die: Sanding in between coats of sanding sealer and lacquer: Er...
Share the Love This modern sofa table was built for donation to a charity fundraising auction. This slideshow was played to generate more interest in the table by highlighting the construction process. Generating more interest generates more money for the charity. The auction was a bit disappointing overall, but my table brought in the more money than anything else. Funds raised at the auction help support programs for people with developmental disabilities. The winning bidder ask...
- My Journey As A Scroll Saw Pattern Designer - 1542 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 94 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1567 entries
- frank - 417 entries
- degoose - 394 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 269 entries
- William - 258 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- shipwright - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 188 entries
- Rustic - 186 entries
- Chris Davis - 183 entries
- BritBoxmaker - 181 entries
- Smitty_Cabinetshop - 170 entries