MaFe style Kanna jointer IIJapan meets Krenov In this part I will fit the kanna-mi (plane iron) into the dai (body), to the Japan meets Krenov Naga-Dai-Kanna (jointer plane) I build when I visited my friend Jamie in Scotland last summer. Part one I build the kanna (hand plane): http://lumberjocks.com/mafe/blog/37783Restoring the kanna-mi (plane iron): http://lumberjocks.com/mafe/blog/40427Setting up a kanna (Japanese hand plane) This is the kanna I build in Scotland, but never had th...
Dai-Naoshi-KannaJapanese scraper plane I posted the plane quite some time back (July 2011), but forgot to post the blog…So here it is finally. Time for learning a little Japanese… What!:A symbioses between a Japanese Tachi-Ba-Kanna (standing blade) and a Krenov style scraper plane, made for the purpose of tuning the sole of Japanese hand planes.I have now also build a Naga-Dai-Kanna (Japanese jointer plane) in this style: http://lumberjocks.com/mafe/blog/37783 Why?:My kind s...
MaFe style Kanna jointerJapan meets Krenov For quite some time now I have had three wishes that I wanted to fulfill in one project.1. To have a Japanese Naga-Dai-Kanna (jointer plane).2. To combine the Krenov plane building style with Japanese planes.3. To find use of a beautiful old hand forged Japanese plane iron that I had purchased some time back. Here an example of a Japanese jointer plane I saw on E-bay. On this link a seller in Germany, I think the price tag huts a wee bit: http:...
I decided to abandon the firewood plane blank after I realized it was lodgepole pine. I’m playing it safe by using a Maple turning blank. It was about 2×2x20. I cut it down to two 10” segments and glued them together to make a 2×4x10 blank. It will be a little wider than necessary, but I’ll have plenty of room for error when I rip the sides. It also turned out the blade on my thrift-store #5 is more pitted than I had hoped. I sharpened it as best I cou...
There’s a new Little Good Pieces blog post: Krenov Smoother 4 – The Pin and Reassembly. I fabricate the crosspin and glue everything up. Check it out! http://littlegoodpieces.wordpress.com/2011/06/20/krenov-smoother-4-the-pin-and-reassembly/
There’s a new Little Good Pieces blog post: .Krenov Smoother 2 – From One Block to Four. Turning the plane blank into recognizable parts. Check it out! http://littlegoodpieces.wordpress.com/2011/06/10/krenov-smoother-2-from-one-block-to-four/
Hand plane DIY convex.Or Mike meets Mads style… THIRD PART FINALE.Press here for first part.Press here for second part. To remind you, this is what we are after. A hand plane, ‘block plane’ size, made for a rounding of 22 cm (app. 4 inch).As you can see Krenov style, and a touch of Japan, at least this was my wish… This part will cover the rounding of the sole, and the finish. Last blog ended with the circle jigs made, here they are, now cut to size. Painters tape to h...
Hand plane DIY convex.Or Mike meets Mads style… SECOND PART.Press here for first part. To remind you, this is what we are after. A hand plane, ‘block plane’ size, made for a rounding of 22 cm (app. 4 inch).As you can see Krenov style, and a touch of Japan, at least this was my wish… Time to make the wedge.I wanted the same wood as the plane, and had an old floorboard, that could be used.Cleaned it up, and cut it to same size as the plane iron, so I have a little slip in the ...
Hand plane DIY convex.Or Mike meets Mads style… Our dear Mike (Stefang), started a ‘master class here on LJ, a blog on how to make a traditional Nordic bucket, and part of this class was ‘making a convex hand plane’, so this was why I did it. Thank you Mike!Also it was a dream for me, a dream to make my own hand plane, not that I needed one, but to prove to myself I could, and in the future be able to make special purpose planes when needed. Since I’m a bad...
- My Journey As A Scroll Saw Pattern Designer - 1547 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 95 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1572 entries
- frank - 417 entries
- degoose - 394 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 271 entries
- William - 258 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- shipwright - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 188 entries
- Rustic - 186 entries
- Chris Davis - 183 entries
- BritBoxmaker - 181 entries
- Smitty_Cabinetshop - 174 entries